ViewSonic PJ1165
restore the screen to normal.
memo The magnify feature will automatically finish if the automatic adjustment is execute, or the aspect, the signal type mode of video or the signal input state is changed.
Press the MAGNIFY
button to close the dialog and
4 Use the cursor buttons S/T to adjust the zoom level.
5
MAGNIFY buttons
select the area to zoom.
3 Press the POSITION button again to finalize the zoom area.
POSITION button
2 Press the POSITION button, then use the cursor buttons S/T/W/X to
Cursor buttons
As illustrated on the right, a dialog will appear on the screen to aid you in magnifying the picture.
1 Press the MAGNIFY
button.
restore the screen to normal.
The icon “” will change to the icon “X”. And after a couple
FREEZE button
of seconds, the dialog will be closed and the screen will be restored to normal.
memo The freezing feature will automatically finish if a remote control’s button that changes some display state (ex. blanking the screen, displaying a dialog or a menu, adjusting the picture, changing the input signal) is pressed, or a button of projector is pressed.
NOTE
• If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
Using The Magnify Feature
Freezing The Screen
1 Press the FREEZE button.
As illustrated on the right, a dialog will appear on the screen, and the screen will freeze at the current image.
2 Press the FREEZE button again to
20
