Sony MDS-S37 operating instructions Labeling tracks and MDs with the remote, To select Press

Editing Recorded MDs

Labeling tracks and MDs with the remote

4 Repeat Steps 2 and 3 until you have entered the

entire title.

If you entered the wrong character

Press 0 or ) until the character to be corrected

6

NAME
á	P p
CHAR	r
= +

0/) 0 )

Alphabet/number buttons

CLEAR p

NUM

starts flashing.

Press CLEAR to erase the incorrect character, then enter

the correct one.

5 Press NAME again.

The entered title appears on the left side of the

display window after the label has been recorded.

To cancel labeling

Press p.

1Press NAME repeatedly until a flashing cursor appears in the display, then do the following:

To label	Make sure that the deck is
A track	Playing, pausing, recording the track
	to be labeled, or stopped after
	locating the track to be labeled
An MD	Stopped with no track number
	appearing in the display

2Select the character type as follows:

To select		Press
	Uppercase letters	CHAR repeatedly until “Selected
		ABC” appears in the display
	Lowercase letters	CHAR repeatedly until “Selected
		abc” appears in the display
	Numbers	NUM repeatedly until “Selected
		123” appears in the display

3Enter one character at a time.

After you enter a character, the cursor shifts rightward and waits for the input of the next character.

26