4.Mark the four points for the drillholes with a pencil.
5.Mark the drillhole with a mandril.
6.Firmly secure the mounting plate q with the supplied screws.
7.Place the kitchen radio diagonally with the two recesses in the retainer lugs of the mounting plate q. Press the kitchen radio up until you hear it engage.
Secure the wire antenna with a piece of adhesive tape such that it does not hang down.
Setting up the kitchen radio
Do not set up the kitchen radio without the mounting plate q. Otherwise the speakers are covered and the sound is scarcely audible.
To set up the kitchen radio with the enclosed moun- ting plate q:
1.Simultaneously press the two retaining levers on the back of the appliance down. Push the mounting plate q back and remove it.
2.Push the two retainer lugs on the mounting pla- te q into the recesses on the lower rear side of the kitchen radio.
3.Firmly press the front part of the mounting plate
q down until you hear it engage. You can now set up the radio.
To disassemble the mounting plate q, grip the mounting plate q from below with the thumbs and press it forwards and up until it disengages. You can now remove the mounting plate q.
Commissioning
Inserting the back-up batteries
The
1.Open the lid of the battery compartment g on the underside of the kitchen radio.
2.Insert the batteries. Make sure the polarities are correct.
3.Close the lid of the battery compartment g. The lid must audibly engage.
Take note:
The
Providing mains power
•Insert the plug into a power socket. The kitchen radio starts in automatic mode. Appearing re- peatedly in the display is
„PLEASE WAIT FOR SETTING THANKS“. When an
If the time is not correctly displayed, enter in the correct date and time manually as described in the following sections.
- 5 -