Eos Wireless Wireless Stereo Speaker Wireless Speaker Operation, Powering Your Wireless Speaker

Page 14

Using Your Eos System

Wireless Speaker Operation

The Wireless Speaker can be used as a wall-mounted speaker (power supply nested in the back of the speaker enclosure) or as a desktop/bookshelf speaker (power supply removed from the speaker enclosure.)

Powering Your Wireless Speaker:

1.Plug your Wireless Speaker into any wall outlet located no more than 150 feet from the Eos Base Station.

2.Turn the Volume Knob clockwise to power the Wireless Speaker.

Note: When power is applied to the Wireless Speaker, the blue Antenna LED will illuminate and flash. The blue Antenna LED will flash while the Wireless Speaker searches for the Base Station. Once the wireless link has been established, the blue Antenna LED will remain illuminated.

Antenna LED status:

Flashing - Wireless Speaker is searching for the Base Station

Solid - Wireless Speaker is linked with the Base Station

Off - Wireless Speaker is powered off

14

Image 14

Contents Wireless Stereo Speaker Thank You For Choosing Eos Wireless Your Total Satisfaction Eos Job #1Table Of Contents Important Safety Instructions Consumer Guide to Product Safety Safety InstructionsQuestions Eos Wireless Products are designed and manufactured byFCC Information Warranty Technical Information Environmental RequirementsParts Checklist Quick StartWireless Stereo Speaker Controls & Functions Controls and FunctionsMuting the Base Station Speakers Using Your Eos SystemTurning the wireless transmitter On/Off Base Stataion Antenna LED statusWireless Speakers/Receivers Setting a Unique ID Adding a Speaker to a System with a Unique IDResetting the ID to Default Range ExtenderAntenna LED status Wireless Speaker OperationPowering Your Wireless Speaker Click Reattaching the Power Supply to the Wireless Speaker Adding Additional Wireless Speakers/Receivers Antenna LED IndicatorTroubleshooting Symptom Possible Problem Solution Wireless SpeakerWarranty Limited WarrantyWarranty