Listening To The Radio
1.) Press the Power button to turns the unit ‘On’. The display lighting and the Power LED indicator come ‘On’.
2.) Press the Function button to select the Radio function.
The first time you select the Radio function the display will show:
“FM 87.5 MHz ST”.
Press the Function button once more to select the AM band. The first time you select the AM band the display will show “AM 520 KHz”.
3.) After selecting the desired band, tune to the desired station by either the Automatic or Manual Tuning methods as follows:
•Manual Tuning
Repeatedly press the Tuning + () / – () buttons on the top panel or TUN
/ buttons on the remote control until the frequency of the desired station appears on the display.
•Automatic Tuning
Depress and hold either the Tuning + () / – () buttons on the top panel or
TUN / buttons on the remote control until the display begins to move, then release the buttons. The tuner will search up or down the band for the next strong station and stop on that station. Repeat this procedure until the tuner stops on the desired station.
NOTES:
A.) Use the Manual Tuning method to tune to weak stations that are bypassed during Automatic Tuning.
B.) If you are listening to a very weak FM Stereo station, try pressing the Mode button to select the FM MONO mode.
This will normally improve the reception although the sound will no longer be in stereo.
20
iP500_042307.p65 | 20 |
23/4/2007, 17:00