Installing The Batteries
The battery compartment is located on the back cabinet. We recommend that you place the unit on a soft surface such as a carpet, on a towel or blanket before turning the unit face down to install the batteries. This will prevent any scratches on the cabinet finish.
1.) With the unit face down press both battery cover locking tabs in the direction of the arrow marks and remove the battery compartment cover.
2.) Insert 8 “AA” batteries, not included, in the battery compartment according to the polarity markings engraved in the compartment. If the batteries are inserted incorrectly the unit will not work.
NOTE: We recommend that you use a
3.) Replace the battery compartment and make sure that it locks securely in place.
IMPORTANT: In order to operate the unit on batteries the AC adapter must be disconnected from the DC IN 10V jack on the back cabinet.
6
iP500_042307.p65 | 6 |
23/4/2007, 17:00