Alarm, Snooze, And Sleep To Music Functions
Setting The Alarm Time and Alarm Mode
1.) If the system power is ‘On’, press the Power button to shut the power ‘Off’. The power must be ‘Off’to set/adjust the alarm time.
2.) With the correct time of day appearing on the display, press the Mode button once. The display changes from current time to alarm time and the alarm time flashes.
One of the alarm mode icons also appears in the display.
3.) While the alarm time display is flashing press the Tuning + () / – () buttons
on the top panel or TUN / buttons on the remote control to set the Hour display forward or backward to the desired
Example: AM 6:00.
Be sure to observe the PM indicator to confirm that you have set the hour correctly. If no PM indicator appears the time display is AM.
4.) Press the Volume + or Volume – buttons to set the Minute display forward or backward to the desired
Example: AM 6:45.
5.) When the display is showing the desired
6.) Press the Volume + or Volume – buttons to select the desired wake up mode: BUZ (Buzzer), RAD (Radio), or iPod.
7.) After 10 seconds the alarm display will stop flashing and the correct time display reappears.
35
iP500_042307.p65 | 35 |
23/4/2007, 17:01