■Playing back tapes
| TAPE 2 3 |
| 7 |
4 | ¢ |
| TAPE 2 3 |
| ¢ |
REVERSE |
|
MODE | LOCK/RELEASE |
| |
| knob |
| 4 |
| 7 |
With automatic tape direction, you can listen to type I or II tapes without having to change any settings.
The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the
Regular play
■1. Turn the LOCK/RELEASE knob counterclockwise to open the cassette holder.
■2. Put the cassette in, with the side you want to listen facing you.
■5. If you need to change the playback direction, press TAPE 2 3.
The opposite side tape direction indicator lights up and the tape playback direction changes.
To stop playing, press 7.
To remove the tape, stop the tape, and open the cassette holder by turning the LOCK/RELEASE knob to the “RELEASE” position.
Notes:
•Do not turn the LOCK/RELEASE knob during playback.
•When no tape is loaded in the deck, “NO TAPE” appears on the display.
To fast-wind/rewind a tape
Press ¢ or 4 to
•The cassette deck automatically stops when the tape reaches its end.
■3. Close the holder gently and turn the knob to “LOCK” position.
■4. Press TAPE 2 3.
The tape is played in the direction shown by the tape direction indicator.
3(Forward playback): The side of the tape facing you is played back.
2(Reverse playback): The opposite side of the tape is played back.
Reverse mode
You can set a tape to play just one side, both sides in succession, or both sides continuously.
Using the remote control
Press REVERSE MODE.
Each time you press the button, reverse mode indicator changes as follows:
= 
=
= (back to the beginning)
: The cassette deck automatically stops after playing one side of the tape.
: The cassette deck automatically stops when playback in the reverse (2) direction is finished.
: The cassette deck continues to play both sides of the tape until the 7 button is pressed.
13