■4. Press ONE TOUCH REC on the system.
The 
indicator lights up and the system starts recording.
•If the tab of the cassette tape is removed to protect erasure or recording, recording does not start.
Tips: When you want to record on both sides of the tape, start recording from the forward direction.
To stop at any time during the recording process, press 7.
Recording an AM station on a tape
When recording an AM broadcast, beats may be produced which are not heard when listening to the broadcast. If this happens, press BEAT CUT to eliminate the beats.
1.Set to AM station and start recording.
2.Press BEAT CUT to eliminate the beats.
Each time you press the button, the display changes as follows:
Disc direct recording
Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you have set in a program.
■1. Insert a blank or erasable cassette tape into the cassette deck.
Be sure that the tape direction indicator and the tape insertion direction are as follows:
[Forward recording]
Tape direction indicator | Tape insertion direction |
3
(Forward)
* Recording will be made on
the tape side facing you.
(Front view)
■2. If you want to record on both sides of the tape, press REVERSE MODE on the remote control to set the system in reverse mode.
Press the button until “ 
” is lit.
■3. Set a disc. ■4. Press CD 6. ■5. Press 7.
•If you want to record specific tracks only, program the tracks first. You can check their total playback time on the display during programming. (See page 12.)
■6. Choose whether to have pauses between tracks.
•If nothing is done, a
•If you do not want pauses between tracks, press CD 6 twice to enter pause
■7. Press ONE TOUCH REC on the system.
The 
indicator lights up and the cassette deck starts recording.
•When the tape reaches its end at the middle of a song in the forward direction (3), the recording in the reverse direction (2) will start from the beginning of that track (or previous track). See diagram below.
Ex.: Case 1
[Recording direction 3 (forward)]
Tape end
|
|
|
|
|
|
|
|
|
|
|
| Track 1 | Track 2 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
more than 10 seconds
*The recording in reverse side (2) starts from the beginning of track 2.
Ex.: Case 2
[Recording direction 3 (forward)]
Tape end
|
|
|
|
|
|
|
|
|
|
|
| Track 1 | Track 2 | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
less than 10 seconds
*The recording in reverse side (2) starts from the beginning of track 1.
•After the disc player has played the entire disc, or all the programmed tracks, the tape automatically stops.
•Recording will also stop when the end of the reverse side (2) is reached (even if the disc play is not yet over).
To stop at any time during the recording process, press 7. The tape stops after four seconds.
Note:
When making SLEEP timer settings while performing disc direct recording, set enough time to allow the disc to finish playing; otherwise, the power will go off before recording is completed.
One Track Recording
You can record the current track being played.
■1. Insert a blank or erasable cassette tape into the cassette deck.
■2. Play the track you wish to record.
■3. Press ONE TOUCH REC on the system.
The disc player returns to the beginning of that track and the track is recorded on the tape. After recording, the disc player and the cassette deck automatically stop.
15