■Using the timer
ON/STANDBY
CANCEL
SLEEP | SET |
| CLOCK/TIMER |
4 | ¢ |
Setting the sleep timer
Use the sleep timer to turn the system off after a certain number of minutes when it is playing. By setting the sleep timer, you can fall asleep to the music and know that your system will turn off by itself rather than playing all night.
■You can set the sleep timer only when the system is turned on.
Using the remote control only
■1. Press SLEEP.
The SLEEP indicator lights up on the display.
The timers let you control the listening and recording functions automatically.
Setting the clock
When the power is first supplied, the CLOCK indicator and “0:00” blink on the display. Set the clock.
Note:
The clock must be correctly set for the timers to work.
Using the remote control only
■1. Press 
ON/STANDBY.
■2. Press CLOCK/TIMER repeatedly until the
CLOCK indicator lights up.
The hour digit blinks on the display.
■3. Press ¢ or 4 to select the hour.
When you press and hold the button, the hour digit changes continuously.
■4. Press SET to set the hour.
The minutes digits start flashing on the display.
■5. Press ¢ or 4 to select the minute.
When you press and hold the button, the minute digit changes continuously.
■6. Press SET to finish setting the clock.
CAUTION: If memory backup batteries are exhausted or not installed, and the AC power cord is plugged in again after being disconnected, or power is restored after a power failure, the CLOCK indicator will blink on the display. Set the current time (clock) again.
■2. Set the length of time you want the source to play before shutting off.
•Each time you press the button, it changes the number of minutes shown on the display in this sequence:
10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the
beginning)
After setting the number of minutes for the sleep timer, the indication will stop blinking and goes off.
The system is now set to turn off after the number of minutes you set.
To confirm the sleep time:
When SLEEP is pressed, the remaining sleep time is displayed. Wait until the display returns to the original display.
To cancel the sleep timer:
Press SLEEP repeatedly to select “OFF”. Turning off the system also cancels the sleep timer.
17