JVC RC-EX30B manual Playing Compact Discs, When playing a CD-R or CD-RW, Handling discs, Storage

Page 12

English

PLAYING COMPACT DISCS

Notes on compact discs

This unit has been designed only to play back the following CDs.

Digital audio CD

Recordable digital audio CD (CD-R)

Rewritable digital audio CD (CD-RW)

When playing a CD-R or CD-RW

You can play back finalized CD-R or CD-RWrecorded in music CD format or in MP3 format. (If a CD-RW has been recorded in a different format, erase all the data on the CD-RW completely before recording on it.)

You can play back CD-R or CD-RW in music CD format like an audio CD.

Some CD-R or CD-RW may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player lens is dirty.

The reflection factor of CD-RW is lower than that of other CDs, possibly causing CD-RW to take longer time to read.

Notes for MP3 files

The unit can only recognize files with “MP3” or “mp3” as the extensions, which can be in any combination of upper and lower cases. The file name needs to be up to 20 characters.

This unit recognizes files and folders on a disc in the following conditions:

up to 640 MP3 files,

up to 256 folders (including the root folder),

up to 8th layers (including the root folder).

It is recommended that you record your material at a 44.1-kHz sampling rate, using the 128-kbps data transfer rate.

Some MP3 files or discs may not be played back because of their characteristics or recording conditions.

MP3 discs require a longer readout time than normal discs because of the complexity of the folder/file configuration.

MP3i and MP3 Pro are not available.

The title, artist name and album name can be displayed as the ID3 TAG (ID3v1/1.1) information.

Handling discs

Since dirty, damaged or warped discs could damage the unit, care should be taken of the following:

Do not touch the reflective recorded surface.

Do not stick or write anything on the label side.

Do not bend discs.

Storage

After removing a disc from the unit, be sure to put it back in its case.

Do not expose discs to direct sunlight, high temperatures from a heater, etc., high humidity or dust.

Cleaning discs

Before loading a disc, wipe off any dust, dirt or fingerprints with a soft, dry cloth. Discs should be cleaned by wiping radially, from the center to edge.

Never use thinner, benzine, record cleaner or antistatic spray.

Removing the disc from its storage case and replacing it

Press the center and lift out.

Press to secure the disc.

• Handling

Incorrect

• Cleaning

CorrectIncorrect

9

Image 12
Contents RC-EX30B Avisos, precauciones y otras notas For U.S.AImportant for Laser Products Contents FeaturesSafety Precautions Handling Precautions Avoid using the unit in the following placesPower Supply Operation on household ACOperation on batteries Names of Parts and Controls Top and front sidesRemote Control Unit Installing batteriesBattery replacement Replace the battery coverTo switch off the power supply completely Turning the Unit ON/OFFNames of buttons STANDBY/ON buttonSetting the Clock To show the clock when the unit is onAdjusting the Sound Adjusting the volumeListening through headphones Selecting the sound modeWhen playing a CD-R or CD-RW Cleaning discsPlaying Compact Discs Handling discsAdjust the volume and sound Basic operationTo stop playback Press PLAY/PAUSE 3/8 to start playbackTo pause playback SkippingSelecting a desired track directly Selecting a desired group album and track MP3 disc onlyPress Repeat on the remote control unit during playback Repeat/Random playbackRepeat playback Random playbackProgrammed playback Programmed playback of an MP3 disc Playing back introductions Intro playbackChanging the FM reception mode Using the antennasPresetting stations Tuning in a preset stationPress Preset UP or Preset Down to select the preset number Cassette Playback Loading a cassetteClose the cassette holder by pressing it gently and firmly Press Tape to enter the tape mode Load a cassette Press Play 2 to start playback Adjust the volume and soundFast-winding a tape Press STOP/EJECT §Using the beat-cut function RecordingStandard recording To stop recordingLoad a CD Press CD/RANDOM to enter CD mode Press Tape on the unit to enter the tape mode Press REC ¶Synchronized recording with CD playback ErasingMaintenance Cleaning the heads, capstan and pinch rollerCleaning the CD pickup lens Open the disc door and clean the lensTroubleshooting Symptom Possible cause ActionSpecifications CD playerTuner Cassette deckWarranty Repair / Replacement Form Limited Warranty Victor Company of Japan, Limited Chaine Portable a CD Mises en garde, précautions et indications diverses For Canada/pour le Canada Cm CD playback capability Handling Precautions Power Supply Names of Parts and Controls Output is switched off with headphones connected Turning the Unit ON/OFF Setting the Clock Adjusting the Sound Playing Compact Discs Cm CD can be played on the unit without an adapter To pause playback Repeat/Random playback Programmed playback Programmed playback of an MP3 disc Radio Reception Presetting stations Cassette Playback Basic operation Recording Synchronized recording with CD playback Maintenance To bright light direct sunlight, etc Sunlight, etc DC 9 V R20 SUM-1/D EN, FR