JVC RC-EX30B manual Programmed playback

English

Programmed playback

Up to 40 tracks can be programmed to play in any desired order.

	1			3,5	2,4,5		6	6	2,4,5	1	3	3
				PROGRAM/						1	2	3
				CLOCK		SET
				PRESET
				DOWN
										4	5	6
				PUSH
										7	8	9
										0
												+
		GROUP		STOP
TAPE												–
	RANDOM			AUS
	CD			PLAY/P
		TUNER
			REMOTE	DISPLAY
		BAND	SENSOR

RM-SRCEX30J REMOTE CONTROL

1Press CD/RANDOM to enter CD mode, if the unit is in TUNER or TAPE mode.

You can press CD/RANDOM on the remote control unit to enter CD mode.

2Press PROGRAM/CLOCK SET in stop mode. The PROGRAM indicator appears in the display window.

PROGRAM

3 Press 4 or ¢ to select a desired track to be programmed.

You can use the number buttons on the remote control unit to select a desired track.

PROGRAM

Track to be programmed

4Press PROGRAM/CLOCK SET.

5Repeat steps 3 and 4 to program other tracks.

6Press PLAY/PAUSE 3/8.

The tracks are played in the order you have programmed.

You can press 3/8 on the remote control unit to start programmed playback.

Note:

If you press CD/RANDOM while in CD mode, the unit enters the random playback mode.

To check the program contents

Press PROGRAM/CLOCK SET repeatedly in stop mode when “PROGRAM” is displayed.

Each time you press the button, the program number and the corresponding track number are shown in the display window.

To add tracks in the program

1Press PROGRAM/CLOCK SET repeatedly in stop mode when “PROGRAM” is displayed so that the track number “0” is shown.

2Press 4 or ¢ (or use the number buttons on the remote control unit) to select the track number to be added, then press PROGRAM/CLOCK SET.

To edit the program

1 Press PROGRAM/CLOCK SET in stop mode when “PROGRAM” is displayed so that the program number you want to edit is shown.

2 Press 4 or ¢ (or use the number buttons on the remote control unit) to select a new track number, then press PROGRAM/CLOCK SET.

To repeat programmed playback

Press REPEAT on the remote control unit after starting programmed playback.

To erase the entire program in the memory

Press STOP 7 (or 7 on the remote control unit) in stop mode when “PROGRAM” is displayed.

The program is cleared, and the PROGRAM indicator goes off.

The program is also cleared when you open the disc door, turn off the unit or change to other audio sources.

Note:

You cannot program more than 40 tracks.

“– – FULL – –” is displayed when you try to program the 41st track.

13