JVC RC-EX30B manual Power Supply

Page 35

English

POWER SUPPLY

Operation on household AC

The AC power cord provided with this unit has one-way connections to prevent electric shock. Refer to the figure below for correct connection.

AC IN

Checking batteries

When the tape speed or output sound level decreases, or CD playback becomes intermittent, replace all batteries with fresh ones.

When making an important recording, use new batteries (preferably alkaline batteries with a longer service life) to avoid any possible failure.

CAUTIONS:

Use only with the JVC power cord provided with this unit to avoid malfunction or damage to the unit. Remove batteries when using the power cord.

Be sure to unplug the power cord from the outlet when going out or when the unit is not in use for an extended period of time.

Operation on batteries

Loading batteries

1Open the battery cover.

Pull the battery cover toward you while pressing the sections marked by the arrows.

2Insert six R20 (SUM-1)/D (13D)-size batteries. Be sure to insert the batteries with the ª and · terminals positioned correctly.

 

1

 

3

 

2

6

5

 

 

4

For better battery usage

Continuous operation of the unit causes the battery power to be consumed quicker than noncontinuous operation.

Operation of the unit in a cold place causes the battery power to be consumed more quickly than in a warm place.

CAUTIONS:

When not using the unit for a long time (more than two weeks) or when using the household AC, remove the batteries to avoid a malfunction or damage to the unit.

When the JVC power cord provided with this unit is connected, the power is automatically switched from the batteries to the household AC even when the batteries are loaded.

However, remove the batteries when using the power cord.

CAUTIONS WHEN USING BATTERIES: When batteries are used incorrectly, it may result in the leakage of chemicals from the batteries or they may explode. The following care should be taken:

Check that the positive ª and negative · terminals of the batteries are positioned correctly and load them as shown in the figure on the left.

Do not mix new and old batteries together, or mix different types of batteries.

Do not try to recharge non-rechargeable batteries.

Remove the batteries when the unit is not to be used for an extended period of time.

If chemicals from the batteries come in contact with your skin, wash them off immediately with water. If chemicals leak onto the unit, clean the unit completely.

R20 (SUM-1)/D (13D)-size batteries

3Replace the cover.

3

Image 35
Contents RC-EX30B For U.S.A Avisos, precauciones y otras notasImportant for Laser Products Safety Precautions ContentsFeatures Avoid using the unit in the following places Handling PrecautionsOperation on batteries Power SupplyOperation on household AC Top and front sides Names of Parts and ControlsReplace the battery cover Remote Control UnitInstalling batteries Battery replacementSTANDBY/ON button To switch off the power supply completelyTurning the Unit ON/OFF Names of buttonsTo show the clock when the unit is on Setting the ClockSelecting the sound mode Adjusting the SoundAdjusting the volume Listening through headphonesHandling discs When playing a CD-R or CD-RWCleaning discs Playing Compact DiscsPress PLAY/PAUSE 3/8 to start playback Adjust the volume and soundBasic operation To stop playbackSelecting a desired group album and track MP3 disc only To pause playbackSkipping Selecting a desired track directlyRandom playback Press Repeat on the remote control unit during playbackRepeat/Random playback Repeat playbackProgrammed playback Playing back introductions Intro playback Programmed playback of an MP3 discUsing the antennas Changing the FM reception modePress Preset UP or Preset Down to select the preset number Presetting stationsTuning in a preset station Close the cassette holder by pressing it gently and firmly Cassette PlaybackLoading a cassette Press STOP/EJECT § Press Tape to enter the tape mode Load a cassettePress Play 2 to start playback Adjust the volume and sound Fast-winding a tapeTo stop recording Using the beat-cut functionRecording Standard recordingErasing Load a CD Press CD/RANDOM to enter CD modePress Tape on the unit to enter the tape mode Press REC ¶ Synchronized recording with CD playbackOpen the disc door and clean the lens MaintenanceCleaning the heads, capstan and pinch roller Cleaning the CD pickup lensSymptom Possible cause Action TroubleshootingCassette deck SpecificationsCD player TunerWarranty Repair / Replacement Form Limited Warranty Victor Company of Japan, Limited Chaine Portable a CD Mises en garde, précautions et indications diverses For Canada/pour le Canada Cm CD playback capability Handling Precautions Power Supply Names of Parts and Controls Output is switched off with headphones connected Turning the Unit ON/OFF Setting the Clock Adjusting the Sound Playing Compact Discs Cm CD can be played on the unit without an adapter To pause playback Repeat/Random playback Programmed playback Programmed playback of an MP3 disc Radio Reception Presetting stations Cassette Playback Basic operation Recording Synchronized recording with CD playback Maintenance To bright light direct sunlight, etc Sunlight, etc DC 9 V R20 SUM-1/D EN, FR