JVC RC-EX30B manual Synchronized recording with CD playback, Erasing

Synchronized recording with CD playback

You can make the CD player to start playback when the tape deck enters the recording mode.

	3		1	5	2 4		4	3		4
					PROGRAM/			1	2	3
					CLOCK	SET
					PRESET
					DOWN
								4	5	6
					PUSH
								7	8	9
								0
										+
		GROUP			STOP
TAPE										–
	RANDOM				PLAY/PAUSE
	CD
		TUNER
			REMOTE		DISPLAY
		BAND	SENSOR

RM-SRCEX30J REMOTE CONTROL

English

1Load a cassette.

Use only a type-I normal tape.

2Load a CD.

3Press CD/RANDOM to enter CD mode.

You can press CD/RANDOM on the remote control unit to enter CD mode.

4To start recording from the desired track, select the track by pressing 4 or ¢ in stop mode. You can use the number buttons on the remote control unit to select the track.

5Press REC ¶.

PLAY 2 is also depressed, and synchronized recording starts.

•The CD SYNC indicator appears in the display window during synchronized recording.

When the tape reaches the end first, the CD player enters the pause mode. Press PLAY/PAUSE 3/8 (or 3/8 on the remote control unit) to continue playback, or press STOP 7 (or 7 on the remote control unit) to stop playback.

When the CD player stops first, the tape continues running. In this case, press STOP/EJECT § to stop the tape.

Erasing

When recording on a pre-recorded tape, the previous recording is erased and only the new recording is heard next time the tape is played back.

To erase a tape without making a new recording

1Press TAPE on the unit to enter the tape mode.

2Press REC ¶.

20