JVC UXJ60, UX-J50 Playing Back Discs, Playing Back the Entire Disc-Normal Play, Press CD 3/8

Playing Back Discs

Continued

This unit has been designed to play back the following discs

—CD, CD-R, and CD-RW.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played only if they are already “finalized.”

•Usually you can play back your original CD-Rs or CD- RWs recorded in music CD format. However, sometimes they may not play depending on their characteristics or recording conditions.

•Before playing CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not play on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

•CD-RWs may require a longer readout time. This is because the reflectance of CD-RWs is lower than for regular discs.

General notes

In general, you will have the best performance by keeping your discs and the mechanism clean.

•Store discs in their cases, and keep them in cabinets or on shelves.

•Keep the unit’s disc tray closed when not in use.

Continued use of irregular shape discs (heart-shape, octagonal, etc.) can damage the unit.

Handling discs

•Remove the disc from its case by

holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to

prevent warping.

Playing Back the Entire Disc—Normal Play

1 Press CD 0. CD

The unit automatically turns on and the disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECTINCORRECT

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CD 3/8. CD

The disc tray automatically closes and the first track of the disc starts playing.

Track number Elapsed playing time

•The disc automatically stops when the last track has finished playing.

To stop playing, press 7.

BASS

Total track number Total playing time

To remove the disc, press CD 0.

• Be careful not to scratch the surface of the disc when placing it back in its case.

•Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

•If the disc cannot be read correctly (because it is scratched, for example) or an unreadable CD-R or CD-RW is inserted Playback will not start.

•If no disc is inserted

“NO DISC” appears on the display.

•If the loaded disc has more than 21 tracks and you select 21st track or above

“– –:– –” appears on the display instead of the playing time.

DO NOT try to open or close the disc tray by hand as it will be damaged.

16