1.COUNTER system
•
2.Tape counter display
•Displays actual tape position.
ex.
00: 01: 45: 10F (Hours : Minutes : Seconds : Frames)
3.ID number
•Displays the selected device's ID number.
4.FILE name
•Displays file name after saving the program under a new name.
ex. travel
5.POWER button
•Turns the device on and off.
•If power is not supplied to the camcorder beforehand, you can not turn the camcorder on and off by clicking this button.
•Some camcorders cannot be turned on and off by clicking this button.
6.MEMO
•If you wish to add some comment to the file, you can input it.
ex. Europe Tour
7.IN/OUT point display
•You can set up to 99 in/out points per file.
8.START button
•Starts editing. Scenes are recorded in scene's numerical order. After starting editing, this button changes to STOP button.
9.ELAPSED TIME
•Displays the total elapsed time of all the programmed scenes.
49
10.Camcorder's operation buttons
• Operate the camcorder.
Stop button
REW/REW Search button
Play button
FF/FF Search button
Pause button
Reverse Slow button
Forward Slow button
•To start Reverse/Forward
•Functions your camcorder does not have cannot be performed by the above buttons.
•Click "File" — "Open VCR Control Window" on menubar to call up the "VCR Control" window. You can control the video source unit from this window.
11.MODE display
•Displays the camcorder's mode when operating the above buttons.
12.SCENE button
•Plays back only one programmed scene so that you can preview it.
•Operates only the camcorder.
13.IN/OUT point button
•Registers the
14.Message display
•Displays the connected device mode, etc.
To exit from the MOVIE PLAYER window, choose "Exit" from the "File" menu.
NOTE:
If you need the "MOVIE PLAYER HELP" window, choose "Contents" from the "Help" menu.