Setting/using stream presets

• After you make your selection, the display will revert to the Normal Operation screen

2. When the desired preset bank is displayed, use the “1” – “6” buttons to tune the desired preset stream

Note: In the Stream List, Artist List and Song List modes, if you don’t want to make a selection, press the

POWER button to exit the mode and return to the Normal Operation screen for the active stream.

There are two ways you can search for a stream preset.

For both, hold the PRE button for at least 1 second to

enter the Preset Tune mode. The Normal Operation

Screen will change so that the preset bank and

You can store up to 24 of your favorite streams as presets, for

preset number will be highlighted (top, right).

quick access. Presets are stored in 4 banks, each containing

Option 1: Use the up & down arrow buttons to move

6 stream presets.

through the presets. Each time you change a

Preset Tune Screen

1. Press the PRE (Preset) button to activate the preset bank

preset its number will appear on the display

you want. The selected bank is shown in the lower left

Preset Bank and Preset Number

and the stream will play.

corner of the Normal Operation Screen (right).

Option 2: Press the SELECT button. The Preset List

2. Select the stream you want to preset (see Basic Operation and Selecting Music, pg. 15–16)

Screen will appear on the display, listing all

3. Hold the number button you want to store the stream in for at least 2 seconds

of the stream presets that have been pro-

grammed (bottom, right)

• The selected preset number will flash and then remain lit on the display to show that it has been memorized.

• Use the cursor up & down buttons to scroll

• If the preset button already has a stream stored in it, it will be replaced with the new stream

through the list. Press the SELECT button

Tuning stream presets

when the desired stream is highlighted on

the display to select it.

The 6 presets in the active bank can be selected by pressing the “1” – “6” buttons

In either mode, when you’re finished searching for a

1. Press the PRE button to cycle through the four banks of preset stations. The display will show the

preset, press the POWER button to exit and return to the Normal Operation Screen.

current preset bank and active preset number in the lower left corner.

Here2Anywhere Instruction Manual