Pelco IV SE manual Spectra SE, Preset Action, Model, Number of Stored Presets

PRESETS

NOTE: The model of the back box you are using limits the number of programmable presets that can be stored and retrieved in the back box memory. If you are using an older model back box, you may program and use up to the maximum number of presets available to the dome drive. However, if the dome drive is changed, the back box model will limit the number of stored presets available to the new dome drive. Refer to the table below for more information.

Back Box Series	Model	Number of Stored Presets
		Spectra	Spectra SE
Spectra III	BB53	99	15
Spectra IV	BB4	128	256

Spectra IV SE Horizon dome systems have 256 preset positions. The programmable presets are numbered 1-32, 35-82, and 100-256.

Each of the user-definable presets can be programmed to use pan, tilt, camera settings, and motion detection.

The following presets are predefined for specific functions:

Preset Action

33Flip command. Pans the dome drive 180 degrees.

34Pan zero command. Directs the dome drive to the factory-determined zero reference point.

83-87 Reserved.

88IR filter IN (color).

89IR filter OUT (black-white).

90-91	Manual limit stops.
92-93	Scan limit stops.

94Reserved.

95Select main programming menu.

96Stop a scan.

97Random scanning.

98Frame scanning.

99Start auto scanning

46 C3434M-A (9/07)