PELCO SPECTRA IV SE HORIZON
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP>
<DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
MOTION
AUTO FLIP
PROPORTIONAL PAN
PARK TIME (MINUTES)
PARK ACTION
SCAN SPEED (DEG/S)
PRESET FREEZE FRAME
LIMIT STOPS
<SET MANUAL STOPS> <CLEAR MANUAL STOPS> <SET SCAN STOPS> <CLEAR SCAN STOPS>
<SET AZIMUTH ZERO> <CLEAR AZIMUTH ZERO>
BACK
EXIT
REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET
LIMIT STOPS
Limit stops are programmable stops that limit the pan range of the dome. There must be two limits, a left and a right, to define an area.
There are two types of limit stops:
MANUAL | A manual (joystick) pan operation stops when a limit stop is reached. |
SCAN | The dome reverses direction during random, frame, or auto scanning when a limit |
| stop is reached. |
To set manual or scan stops:
1.Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS.
2.Press Iris Open.
3.Follow the directions displayed on the monitor.
NOTE: In order for the manual or scan stops to work, the LIMIT STOPS option must be ON.
To clear manual or scan stops:
1.Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN STOPS.
2.Press Iris Open.
3.Follow the directions displayed on the monitor.
42 |