Pelco IV SE manual Clear

CLEAR

PELCO SPECTRA IV SE HORIZON

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

CLEAR

CLEAR ALL ZONES

CLEAR ALL PRESETS

CLEAR ALL PATTERNS

CLEAR ALL WINDOW BLANKING CLEAR ALL EVENTS

RESTORE FACTORY DEFAULTS

BACK

EXIT

Use this setting to clear user-defined settings or return the dome to factory default settings.

The following are the available settings:

ALL ZONES	Clears all zones. To clear a single zone, refer to the Zones
	section on page 53.
ALL PRESETS	Clears all presets. To clear a single preset, refer to the Presets
	section on page 46.
ALL PATTERNS	Clears all patterns. To clear a single pattern, refer to the
	Patterns section on page 52.
ALL WINDOW BLANKING	Clears all blanked windows. To clear a single blanked window,
	refer to the Window Blanking section on page 54.
CLEAR ALL EVENTS	Clears all events. To clear a single event, refer to the Event
	section on page 67.
RESTORE FACTORY DEFAULTS	Restores all camera settings to factory default settings.

62 C3434M-A (9/07)