Pelco IV SE manual Video Level, Wide Dynamic Range ON, Wide Dynamic Range OFF

PELCO SPECTRA IV SE HORIZON

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<WINDOW BLANKING> <ALARMS>

<AUX>

<TITLE TEXT> <CLEAR> <PASSWORD> <CLOCK> <EVENT>

BACK

EXIT

CAMERA

TYPE OF LIGHTING

AUTO FOCUS

ZOOM LIMIT

ZOOM SPEED

LOW LIGHT LIMIT

IR CUT FILTER

AUTO IR LEVEL

<ADVANCED SETTINGS>

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED

AGC LIMIT

AUTO IRIS

AUTO IRIS LEVEL

AUTO IRIS PEAK

AUTO SHARPNESS

SHARPNESS LEVEL

AUTO WHITE BALANCE

RGAIN B GAIN

BACKLIGHT COMP

VIDEO LEVEL

WIDE DYNAMIC RANGE

PROGRESSIVE SCAN

E. IMAGE STABILIZER

BACK

EXIT

VIDEO LEVEL

Set the video output to one of the following:

NORMAL	1.0 volt peak-to-peak
HIGH (default setting)	1.2 volt peak-to-peak to compensate for losses in video cable.

WIDE DYNAMIC RANGE

Wide dynamic range (WDR) balances the brightest and darkest sections of a scene to produce a picture that is better balanced in lighting and provides more detail.

Available settings are OFF and ON. The default setting is OFF. When wide dynamic range is set to ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second.

NOTE: Wide dynamic range is disabled when electronic image stabilization is set to 5 Hz or 10 Hz.

Wide Dynamic Range ON Wide Dynamic Range OFF

C3434M-A (9/07) 37