POWER UP
PELCO SPECTRA IV SE HORIZON
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
POWER UP
POWER UP ACTION
BACK
EXIT
POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the power to the dome is cycled.
The following settings are available:
NONE | No action. |
AUTO (default) | The dome resumes its prior activity or direction before the power outage. |
AUTO SCAN | Dome starts auto scan operation. |
RANDOM SCAN | Dome starts random scan operation. |
FRAME SCAN | Dome starts frame scan operation. |
PRESET 1 | Dome goes to preset 1. |
PRESET 2 | Dome goes to preset 2. |
PRESET 3 | Dome goes to preset 3. |
PRESET 4 | Dome goes to preset 4. |
PRESET 5 | Dome goes to preset 5. |
PRESET 6 | Dome goes to preset 6. |
PRESET 7 | Dome goes to preset 7. |
PRESET 8 | Dome goes to preset 8. |
PATTERN 1 | Dome runs pattern 1. |
PATTERN 2 | Dome runs pattern 2. |
PATTERN 3 | Dome runs pattern 3. |
PATTERN 4 | Dome runs pattern 4. |
PATTERN 5 | Dome runs pattern 5. |
PATTERN 6 | Dome runs pattern 6. |
PATTERN 7 | Dome runs pattern 7. |
PATTERN 8 | Dome runs pattern 8. |
44 |
