Pelco IV SE manual Label Positions

LABEL POSITIONS

PELCO SPECTRA IV SE HORIZON

LANGUAGE

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DISPLAY SETUP

PRESET LABEL

ZONE LABEL

ZOOM

AZIMUTH/ELEVATION

DIRECTION

ALARM MESSAGE

DATE/TIME

<LABEL POSITIONS> RESTORE FACTORY DEFAULTS

BACK

EXIT

LABEL POSITION

[ZONE LABEL-------		]
[PRESET LABEL-------		]
[ALARM 1	-------	]
[EVENT-------	]

Labels can be placed anywhere on the monitor. This feature allows you to customize the appearance of your monitor screen.

The following labels are not set at fixed positions:

PRESET LABEL

ZONE LABEL

ALARM 1

ZOOM RATIO - XXX.XX

AZIMUTH1/ELEVATION2 - XXX°/-XX°

DIRECTION - NE

EVENT LABEL

To set a label position:

1.Use the joystick to position the cursor beside a label.

2.Press Iris Open.

3.Use the joystick to move the label up, down, left, and/or right.

4.Press Iris Open.

5.Repeat steps 1 through 4 to position other labels.

6.Position the cursor next to Save and Exit. Press Iris Open to save settings and exit menu.

SAVE AND EXIT

CANCEL AND EXIT

HELP

XXXo/-XXXo

NE

XXX.XX

XX/XX/YYYY 00:00

1Azimuth is the pan angle from zero to 359 degrees.

2Elevation is the tilt position from 18 to -90 degrees.

C3434M-A (9/07) 29