PELCO SPECTRA IV SE HORIZON
LANGUAGE
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<WINDOW BLANKING> <ALARMS>
<AUX>
<TITLE TEXT> <CLEAR> <PASSWORD> <CLOCK> <EVENT>
BACK
EXIT
EVENT
EVENT TYPE
EVENT LABEL
<EDIT EVENT LABEL> <EDIT EVENT> <CLEAR EVENT> <LIST EVENT>
HOLIDAY
<EDIT HOLIDAY> <CLEAR HOLIDAY> <LIST HOLIDAYS>
BACK
EXIT
REFERENCE INFORMATION |
|
12:00 AM | NONE |
EDIT EVENT LABEL
After an event has been programmed, the label can be changed using the following steps:
1.Use the joystick to position the cursor beside EDIT EVENT LABEL.
2.Press Iris Open. The following appears on the monitor:
EDIT EVENT LABEL
EVENT 1
1234567890OK
ABCDEFGHIJCANCEL KLMNOPQRST
abcdefghijBACKSPACE klmnopqrst
uvwxyz#&:*
3.Use the joystick to position the cursor beside a character. Press Iris Open to enter selection. To clear a character, position the cursor beside BACKSPACE, and then press Iris Open.
4.When label is completed, move the cursor to OK. Press Iris Open to return to the Edit Schedule menu.
After an event has been labeled, the label will be displayed when the event is activated according to the display setup values for this label. Refer to the Display Setup section on page 28 for instructions on how to change the way a label is displayed on the monitor.
68 |