Pelco manual Spectra IV SE Horizon Menu Tree, C3434M-A9/07

Spectra IV SE Horizon Menu Tree

PELCO SPECTRA IV SE HORIZON

		LANGUAGE	ENGLISH
		<SYSTEM INFORMATION>
		<DISPLAY SETUP>
		<DOME SETTINGS>
		RESET CAMERA
		CYCLE CAMERA POWER
		REBOOT SYSTEM
		EXIT
SYSTEM INFORMATION		DISPLAY SETUP
SERIAL #	XXXXXXXXXXXXXX	PRESET LABEL	2 (SECS)
DOME DRIVE MODEL	XX-XXXX	ZONE LABEL	2 (SECS)
BACK BOX MEMORY	AVAILABLE	ZOOM	2 (SECS)
SOFTWARE VERSION	XX.X	AZIMUTH/ELEVATION	2 (SECS)
FONT VERSION	XX.X	DIRECTION	OFF
COMM	XXXXXXXXXX	ALARM MESSAGE	2 (SECS)
D ADDRESS	1	DATE/TIME	ON
P ADDRESS	OFF2
CM9500 MODE	OFFC	<LABEL POSITIONS>
32 PRESETS		RESTORE FACTORY DEFAULTS
PROTOCOL
<ADDITIONAL>

LABEL POSITION

ADDITIONAL

FREE MEMORY	XXXXXX
LAST RESET	POWER ON
AZIMUTH ZERO OFFSET	0°
MOTOR ACTIVE	YES
CAMERA ACTIVE	YES
VIDEO LEVEL	NORMAL
CAMERA MODEL	XXXX-XXXX
LANGUAGE 1	ENGLISH X.XX
. . .	ITALIANO X.XX
LANGUAGE 10

[ZONE LABEL	-------	]
[PRESET LABEL------		]
[ALARM 1------	]

SAVE AND EXIT CANCEL AND EXIT HELP

XXX/-XX NE XXX.XX

CAMERA		ADVANCED SETTINGS		MOTION		POWER UP
TYPE OF LIGHTING	OUTDOOR	SHUTTER SPEED	AUTO	AUTO FLIP	ON	POWER UP ACTION	AUTO
AUTO FOCUS	ON	AGC LIMIT	28	PROPORTIONAL PAN	ON
ZOOM LIMIT	XXXX	AUTO IRIS	AUTO	PARK TIME (MINUTES)	0
ZOOM SPEED	XXXX	AUTO IRIS LEVEL	66	PARK ACTION	NONE
LOW LIGHT LIMIT	XXXXXX	AUTO IRIS PEAK	8	SCAN SPEED DEG/S	25
IR CUT FILTER	XXXX	AUTO SHARPNESS	ON	PRESET FREEZE FRAME	AUTO
AUTO IR LEVEL	AUTO	SHARPNESS LEVEL	26	LIMIT STOPS	ON
		AUTO WHITE BALANCE	ON	<SET MANUAL STOPS>
<ADVANCED SETTINGS>
		R GAIN	482	<CLEAR MANUAL STOPS>
		B GAIN	678	<SET SCAN STOPS>
		BACKLIGHT COMP	OFF	<CLEAR SCAN STOPS>
		VIDEO LEVEL	HIGH	<SET AZIMUTH ZERO>
		WIDE DYNAMIC RANGE	OFF	<CLEAR AZIMUTH ZERO>
		E. IMAGE STABILIZER	OFF	REFERENCE INFORMATION
				MANUAL LIMITS SET	NO
				SCAN LIMITS SET	NO

ZONES		WINDOW BLANKING		SET WINDOWS
ZONE NUMBER	1	STYLE	GRAY	WINDOW NUMBER	1
***ZONE NOT DEFINED***		BLANK ALL ABOVE	OFF	<EDIT WINDOW LOCATION>
<EDIT ZONE LABEL>		BLANK ALL BELOW	OFF	<EDIT WINDOW ZOOM>
<EDIT ZONE>		<SET WINDOWS>		<EDIT SCHEDULE>	NO
ZONE ENABLED	ON			ENABLE WINDOW
ZONE BLANKING	OFF			REVERSE
<CLEAR ZONE>				CLEAR WINDOW

CLEAR	PASSWORD		EDIT THE PASSWORD	CLOCK
CLEAR ALL ZONES	ENABLE PASSWORD	OFF	1234567890	TIME BASE	INTERNAL CLOCK
CLEAR ALL PRESETS	<EDIT PASSWORD>		ABCDEFGHIJ	TIME FORMAT	12 HOUR
CLEAR ALL PATTERNS			KLMNOPQRST	SET TIME	12:00 AM
CLEAR ALL WINDOW BLANKING			UVWXY.,-/	DATE FORMAT	MM/DD/YYYY
CLEAR ALL			abcdefghij	SET DATE	00/00/0000
RESTORE FACTORY DEFAULTS			klmnopqrst	DAYLIGHT SAVINGS	OFF
			uvwxyz#&:*

24 C3434M-A (9/07)