Samsung DVDVR300 instruction manual Auto Clock Set, Clock Data CH

Auto Clock Set

This menu is used to set the current time. You need to set the time to use timer recording.

1 With the unit in Stop mode, press the MENU button.

No Disc

4	Select Auto Clock Set using the			❷ buttons, then
	press the ❿ or ENTER button.
		No Disc		Clock Set
			Auto Clock Set
			Manual Clock Set

Note

You must have the antenna connected to set the

Auto Clock. See page Antenna Connections

The Clock will be automatically set when you turn

off the recorder.

System Setup

2	Using the	❷ buttons, move the selection bar to
	“Setup” then press Enter to select.
3	Select Clock Set using the ❷ buttons, then press

the ❿ or ENTER button.

No Disc

Select the sub menu (Clock Data CH, Time Zone or

5 Daylight Saving) using the ❷ buttons, then press the ❿ or ENTER button.

No Disc		Auto Clock Set
	Clock Data CH	: Automatic
	Time Zone	: Automatic
	Daylight Saving	: Automatic

Clock Data CH

Select a channel that carries a time signal using the

❷buttons then press the ❿ or ENTER button. Select Auto to set the channel automatically.

No Disc Clock Data CH

Select channel : Auto

24 - English