Variable Search
System
Press the ANYKEY button to display the search screen in the stop mode. When a program is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it is probably because the cassette was recorded on a VCR without VISS. If you want to index two programs in a row, set your VCR to stop, then start recording each program.
1 | Go to [0:00:00] stop |
Use this feature when you want to search for the |
[0:00:00] counter position on a cassette. Press the CLEAR button at the point on the tape where you want to set the counter to [0:00:00].
While a cassette is stopped, press the ANYKEY button. The VCR will rewind or fast forward, searching for the [0:00:00] counter position, and then automatically stop at that position.
2 | End search |
Use this feature when you want to search for a blank | |
| position to record a program on a cassette. While a |
| cassette is stopped, press the ANYKEY button. The |
| VCR will fast forward, searching for a blank position, |
| and then automatically stop at that position. If the |
| VCR reaches the end of the tape during end search, |
| the tape will be ejected. |
|
|
3 | Scan and play |
Use scan and play when you don’t know exactly |
where a program is located on a cassette tape.
- Forward Intro Scan
Highlight “Forward Intro Scan”, then press the
ENTER button.
- Reverse Intro Scan
Highlight “Reverse Intro Scan”, then press the
ENTER button.
Playback
English - 57