Samsung DVDVR300 Add/Delete Channel, Select RF Output Channel, Change RF Output CH

6	Add/Delete Channel.
	Press Enter to move the cursor to select Add, then

press ❿ if you want to select Delete. Press ENTER to confirm your selection.

DVD-VIDEO

RF Output Channel

When you connect the DVD Recorder-VCR to TV with RF Antenna Cable, follow the steps below to set the

RF output channel.

1	Open “MENU”
	With the DVD in Stop or Play mode, press the
	MENU button.
2	Select “Setup”
	Using the ❷ buttons, move the selection bar to

“Setup” then press ENTER to select.

3	Select “Channel Set”
	Using the ❷ buttons, move the selection bar to

“Channel Set,” then press ENTER to select.

4	Select “RF Output Channel”
	Move the selection bar to “RF output Channel”,

then press right to change.

RF output Channel

5	Change “RF Output CH”
	Select channel 3 or 4 using the ❷ button.
	Then press ENTER to change.
6	Change “TV Channel”
	A message will appear on your TV. When the mes-

sage disappears, change your TV to channel 3 or 4 to match the RF output channel of the player.

System Setup

English - 33