Samsung DVDVR300 instruction manual Press OPEN/CLOSE button to close the disc tray, Playback

1	Press the OPEN/CLOSE button.		Do not move your DVD Recorder-VCR while play-
			ing, as this may cause damage to the disc.
		CAUTION
			Make sure to press the OPEN/CLOSE button to
2			open or close the disc tray.
	Place a disc gently into the tray with the disc’s label		Do not push the disc tray while it is being opened
	facing up.		or closed, as this may cause a product malfunction.
			Do not place foreign materials on or in the disc
			tray.
	Press OPEN/CLOSE button to close the disc tray.		Some functions may perform differently or be dis-
			abled depending on the disc type. If this occurs,
3 • Your DVD Recorder-VCR closes the disc tray and
			refer to the instructions written on the disc case.
	plays the disc automatically.		Be especially careful that children's fingers are not
	• When a recordable media (DVD-RAM, DVD-RW,
			caught between the disc tray and the tray chassis
	DVD-R, etc.) is used, Auto Playback cannot be
	activated without pressing the Play button. When		when it closes.
	pressing the Power button while a disc is in the		After turning power on, it will take a few

tray, the unit will be activated. Press PLAY to start	seconds until the DVD operates.
playback.

•If you insert MP3 Disc, your DVD Recorder-VCR will display the file list on the screen and start.

•When a JPEG disc is inserted, folders and a file list are displayed in the Album format.

4 Press the STOP button to stop playback.

Note

When you stop disc play, the recorder remembers

where you stopped, so when you press PLAY but-

ton again, it will pick up where you left off. (unless

the disc is removed or the recorder is unplugged,

or if you press the STOP button twice.) This func-

tion is only applicable to DVD-VIDEO, DVD-RAM,

DVD-RW, DVD-R or audio CDs (CD-DA).

English - 39

Playback