26 | Ray54 VHF Radio |
|
|
Priority Saved Scan
Press and hold the SCAN/SAVE key while Saved Scan is active to initiate Priority Saved Scan.
SAVED PSCAN appears on the dot matrix display.
Priority Saved Scan is much like Priority
Scan except that the radio alternates
searching for activity on the Priority
Channel 16 and the channels stored in
memory.
Priority Saved Scan is demonstrated in the figure to the left.
Note: Whenever Weather Alert is activated, the WX Alert channel is also monitored during Priority Saved Scan. If the WX Alert tone is detected, the scan is halted to receive the Weather Alert broadcast.
Press and hold SCAN/SAVE for 3 seconds to exit Priority/Priority Saved Scan and return to All/Memory Scan.
Press and release the CLEAR/WX key to exit Priority/Priority Saved Scan and return to the
4.11 Adding Channels to Memory
The Ray54 can store any channel. The stored channels are the ones scanned in the Saved (Memory) Scan mode.
➤To Add Channels to Memory
1.During normal operation mode, use the CH knob to select the desired channel for programming.
2.Press and hold the SCAN/SAVE key for 3 seconds.