Raymarine Ray54 manual Automatic Channel Changing for Incoming Calls

Page 88

78	Ray54 VHF Radio

3. Rotate the CH knob to select the desired setting and push to accept.

AUTOMATIC sends out your vessel’s position data as soon as it is requested. MANUAL sends out the data only after you respond to the request.

OFF will not send position data under any circumstances, nor notify you that the request has been made.

The default setting is MANUAL, which is described in Receiving a Position Request From Another Station on page 53.

Note: The Position Reply function is only available when a working GPS is connected to the radio.

Automatic Channel Changing for Incoming Calls

For incoming Distress and All Ships Urgency Calls, this option determines whether your radio automatically switches to Priority Channel 16 to receive the call or prompts you to manually accept or decline the channel change.

The default setting is to ENABLE the auto channel change.

This feature is useful for preventing your radio from automatically switching channels while you are maintaining a continuous watch on a certain channel (for example, in a VTS controlled area) or working with other vessels (for example, for towage).

Note: This feature can disable automatic channel switching for incoming DSC Distress and All Ships Urgency Calls. If enabled, you are responsible for determining whether manually declining the call is appropriate.

By regulation, this feature cannot disable the automatic switching of Individual Distress and Individual Urgency Alerts.

➤ To enable/disable the channel change:

1.From the DSC SETUP menu item described on page 71, rotate the CH knob until the arrow points to AUTO CH CHG.

Image 88

Contents Ray54 Page Warranty About this HandbookIntroduction Conventions UsedImportant Information FCC NoticeStation License Operator LicenseMaritime Mobile Service Identity Mmsi Industry CanadaSafe Compass Distance Antenna Mounting and EME ExposureEMC Conformance Contents CLEAR/WX Distress Digital Selective Calling DSC How to Contact Raymarine Introduction FeaturesRay54 Fixed Station VHF Radio Digital Selective Calling DSC Unpacking and Inspection InstallationEquipment Supplied Typical Mounting Methods Planning the InstallationFlush Mounting Typical Mounting Methods Power Connections Wiring ConnectionsGrounding External Speaker ConnectionsGPS/NMEA Data Antenna Mounting Suggestions Antenna ConnectionsAntenna Mounting and EME Exposure Getting Started Keypad and Rotary KnobsMain Unit Rotary Keys Microphone KeysMain Unit Push Keys Microphone Main UnitPTT 16/9CALL/MENU HILO/USER LCD Display 12 /9HI/LO TX Power Local Local/Distant ModeBattery Low User Favorite Channel ModeWX Weather Channel Alert Weather AlertI C Channel Set Simplex ChannelTurning the Power on and OFF Setting the VolumeSetting the Squelch Setting the Power OutputOverriding the Low Output Power Restriction Setting the Channel Selecting a Weather ChannelOn the microphone On the main unitSelecting the Priority Channel Weather Alert OperationSelecting the Secondary Priority Channel Reprograming the Secondary Priority Channel Using the Scan Modes TransmittingAll Scan Saved Memory ScanPriority All Scan Adding Channels to Memory Priority Saved ScanGeneral Operations Using the Monitor Modes Dual WatchTri Watch Menu Mode Operation User Channel ModeDSC Call Operation Digital Selective Calling DSC DSC Call Function IndividualGroup ALL ShipsRequest PositionRX Call LOG Making DSC Calls to Coast Stations Individual CallsTransmitting an Individual Call If using Manual Mmsi ID entry Ray54 VHF Radio To cancel the mode without sending ACK Receiving Individual CallsGroup Calls Transmitting a Group CallDigital Selective Calling DSC Receiving Group Calls To ignore the Group Call All Ships Calls Transmitting an All Ships CallReceiving an All Ships Call To decline the All Ships Call Distress Calls Sending a Distress CallUndesignated Quick Distress Call Designated Distress CallTo cancel the automatic Distress resend press CLEAR/WX Cancelling a Distress Call Made in Error Receiving a Distress CallReceiving a Distress ACK Sent from a Coast Station Receiving a Distress Relay Sent by Another StationPosition Request Specifying the Target VesselIf using Manual Mmsi ID entry When no reply is received within 3 minutes Retrieving the Last Received Position DataCall Log Receiving a Position Request From Another StationMaking a Call from a Call Log Entry Saving an Mmsi ID Number from a Call Log Entry Press and hold the SCAN/SAVE keyDSC Distress Log Menu Settings Menu FunctionUsing the Microphone Keys to Make Selections DSC Phonebook Adding an EntryUse same procedure to enter the Mmsi characters Editing an Existing Entry Deleting an Existing Entry Contrast Adjustment Backlight AdjustmentLocal / Distant GPS/Time Setup When GPS Information Not AvailableRotate the CH knob to scroll through the selections Settings Menu Settings Latitude/Longitude Display Time DisplayTime Offset Time FormatRadio Setup BandChannel CH Name Ring VolumeKey Beep DSC Setup My Mmsi ID Group Mmsi Setup Group Name Menu Settings Editing an Existing Entry Position Reply Automatic Channel Changing for Incoming Calls Procedure When Enabled Procedure When DisabledResetting Factory Defaults Customer Service How to Contact RaymarineProduct Repair and Service On the InternetAccessories and Parts Technical SupportGeneral Appendix a SpecificationsPLL Receiver TransmitterMarine VHF Channels and Frequencies Appendix B Channel ListXmit RCV 86Ray54 VHF Radio Freq Use 82A Canadian Marine VHF Channels and Frequencies WC, ECAC, GL PC, AC, GL156.750 All areas AC, GL, PC90Ray54 VHF Radio EC, PC 156.875Area of Operation AC, GL, NLInternational Marine VHF Channels & Frequencies 94Ray54 VHF Radio 161.925 WX Channels North America only Appendix C Glossary VOL VHFIndex NumericsMmsi 101 102