Raymarine Ray54 manual DSC Call Function, Individual, Group, ALL Ships

Page 42

32	Ray54 VHF Radio

5.1DSC Call Function

DSC Call Mode is used to initiate DSC Individual, Group, All Ships, Distress and Position Request calls and to access the DSC Call Logs and Phonebook.

The channel remains unchanged and you can perform normal TX operation. DSC mode is exited when transmitting.

Press and release the CALL/MENU key while in normal operation mode to enter DSC Call Mode.

Note: Distress calls are made using the DISTRESS key.

The Ray54’s DSC Call type and structure are as follows:

DSC Call Type	Description

INDIVIDUAL	Makes a ROUTINE DSC call to a specific station identified by its MMSI
	number.

GROUP	Sends transmissions that are only received by radios that share a common
	Group MMSI number. Up to 3 Group MMSI numbers can be stored and
	called.

ALL SHIPS	Sends out a message to all ships within range that you need assistance but
	the situation is not serious enough for a Distress Call. All Ships calls should
	only be used if hailing for assistance on channel 16 fails. There are two
	types of All Ships Calls: SAFETY for advisory alerts and URGENCY for assis-
	tance when life is not in immediate danger.

DISTRESS	Sends out the position and time information from the input NMEA data
	along with your MMSI number. This digital information lets other ships
	and shore stations equipped with appropriate DSC equipment know
	where you are and that you are in a Distress situation.

Image 42

Contents Ray54 Page Introduction WarrantyAbout this Handbook Conventions UsedStation License Important InformationFCC Notice Operator LicenseMaritime Mobile Service Identity Mmsi Industry CanadaAntenna Mounting and EME Exposure Safe Compass DistanceEMC Conformance Contents CLEAR/WX Distress Digital Selective Calling DSC How to Contact Raymarine Features IntroductionRay54 Fixed Station VHF Radio Digital Selective Calling DSC Installation Unpacking and InspectionEquipment Supplied Planning the Installation Typical Mounting MethodsFlush Mounting Typical Mounting Methods Power Connections Wiring ConnectionsExternal Speaker Connections GroundingGPS/NMEA Data Antenna Connections Antenna Mounting SuggestionsAntenna Mounting and EME Exposure Getting Started Keypad and Rotary KnobsMicrophone Keys Main Unit Rotary KeysMain Unit Push Keys PTT MicrophoneMain Unit 16/9CALL/MENU HILO/USER LCD Display 12 /9Battery Low HI/LO TX PowerLocal Local/Distant Mode User Favorite Channel ModeI C Channel Set WX Weather ChannelAlert Weather Alert Simplex ChannelSetting the Squelch Turning the Power on and OFFSetting the Volume Setting the Power OutputOverriding the Low Output Power Restriction On the microphone Setting the ChannelSelecting a Weather Channel On the main unitSelecting the Priority Channel Weather Alert OperationSelecting the Secondary Priority Channel Reprograming the Secondary Priority Channel Using the Scan Modes TransmittingAll Scan Saved Memory ScanPriority All Scan Adding Channels to Memory Priority Saved ScanGeneral Operations Using the Monitor Modes Dual WatchTri Watch User Channel Mode Menu Mode OperationDSC Call Operation Digital Selective Calling DSC Group DSC Call FunctionIndividual ALL ShipsPosition RequestRX Call LOG Individual Calls Making DSC Calls to Coast StationsTransmitting an Individual Call If using Manual Mmsi ID entry Ray54 VHF Radio To cancel the mode without sending ACK Receiving Individual CallsGroup Calls Transmitting a Group CallDigital Selective Calling DSC Receiving Group Calls To ignore the Group Call All Ships Calls Transmitting an All Ships CallReceiving an All Ships Call To decline the All Ships Call Distress Calls Sending a Distress CallUndesignated Quick Distress Call Designated Distress CallTo cancel the automatic Distress resend press CLEAR/WX Cancelling a Distress Call Made in Error Receiving a Distress CallReceiving a Distress ACK Sent from a Coast Station Receiving a Distress Relay Sent by Another StationPosition Request Specifying the Target VesselIf using Manual Mmsi ID entry When no reply is received within 3 minutes Retrieving the Last Received Position DataCall Log Receiving a Position Request From Another StationMaking a Call from a Call Log Entry Saving an Mmsi ID Number from a Call Log Entry Press and hold the SCAN/SAVE keyDSC Distress Log Menu Settings Menu FunctionUsing the Microphone Keys to Make Selections DSC Phonebook Adding an EntryUse same procedure to enter the Mmsi characters Editing an Existing Entry Deleting an Existing Entry Backlight Adjustment Contrast AdjustmentLocal / Distant GPS/Time Setup When GPS Information Not AvailableRotate the CH knob to scroll through the selections Settings Menu Settings Time Offset Latitude/Longitude DisplayTime Display Time FormatRadio Setup BandRing Volume Channel CH NameKey Beep DSC Setup My Mmsi ID Group Mmsi Setup Group Name Menu Settings Editing an Existing Entry Position Reply Automatic Channel Changing for Incoming Calls Procedure When Enabled Procedure When DisabledResetting Factory Defaults Product Repair and Service Customer ServiceHow to Contact Raymarine On the InternetAccessories and Parts Technical SupportAppendix a Specifications GeneralPLL Receiver TransmitterAppendix B Channel List Marine VHF Channels and FrequenciesXmit RCV 86Ray54 VHF Radio Freq Use 82A AC, GL Canadian Marine VHF Channels and FrequenciesWC, EC PC, AC, GL156.750 All areas AC, GL, PC90Ray54 VHF Radio EC, PC 156.875Area of Operation AC, GL, NLInternational Marine VHF Channels & Frequencies 94Ray54 VHF Radio 161.925 WX Channels North America only Appendix C Glossary VOL VHFIndex NumericsMmsi 101 102