Raymarine Ray54 manual If using Manual Mmsi ID entry

Page 61

Chapter 5: Digital Selective Calling (DSC)	51

5.Rotate the CH knob until the arrow points to the desired name.

If using MANUAL MMSI ID entry:

Enter the MMSI number using the CH knob. Rotate the CH knob to select each character and then push in the CH knob to accept. A full description of manual character entry can be found in Adding an Entry on page 59.

6.Push in the CH knob to select the desired name/MMSI ID.

7.Press the CH knob again to send the Position Request Call.

The call is transmitted on channel 70, and then the radio tunes to the orig- inal channel and waits for acknowledgement. During this period you are still able to receive calls.

Note: Pressing PTT at any time before reply is received cancels the Position Request. In this case, you must resubmit the request.

Image 61

Contents Ray54 Page About this Handbook WarrantyIntroduction Conventions UsedFCC Notice Important InformationStation License Operator LicenseIndustry Canada Maritime Mobile Service Identity MmsiSafe Compass Distance Antenna Mounting and EME ExposureEMC Conformance Contents CLEAR/WX Distress Digital Selective Calling DSC How to Contact Raymarine Introduction FeaturesRay54 Fixed Station VHF Radio Digital Selective Calling DSC Unpacking and Inspection InstallationEquipment Supplied Typical Mounting Methods Planning the InstallationFlush Mounting Typical Mounting Methods Wiring Connections Power ConnectionsGrounding External Speaker ConnectionsGPS/NMEA Data Antenna Mounting Suggestions Antenna ConnectionsAntenna Mounting and EME Exposure Keypad and Rotary Knobs Getting StartedMain Unit Rotary Keys Microphone KeysMain Unit Push Keys Main Unit MicrophonePTT 16/9CALL/MENU HILO/USER 12 /9 LCD DisplayLocal Local/Distant Mode HI/LO TX PowerBattery Low User Favorite Channel ModeAlert Weather Alert WX Weather ChannelI C Channel Set Simplex ChannelSetting the Volume Turning the Power on and OFFSetting the Squelch Setting the Power OutputOverriding the Low Output Power Restriction Selecting a Weather Channel Setting the ChannelOn the microphone On the main unitWeather Alert Operation Selecting the Priority ChannelSelecting the Secondary Priority Channel Reprograming the Secondary Priority Channel Transmitting Using the Scan ModesSaved Memory Scan All ScanPriority All Scan Priority Saved Scan Adding Channels to MemoryGeneral Operations Dual Watch Using the Monitor ModesTri Watch Menu Mode Operation User Channel ModeDSC Call Operation Digital Selective Calling DSC Individual DSC Call FunctionGroup ALL ShipsRequest PositionRX Call LOG Making DSC Calls to Coast Stations Individual CallsTransmitting an Individual Call If using Manual Mmsi ID entry Ray54 VHF Radio Receiving Individual Calls To cancel the mode without sending ACKTransmitting a Group Call Group CallsDigital Selective Calling DSC Receiving Group Calls To ignore the Group Call Transmitting an All Ships Call All Ships CallsReceiving an All Ships Call To decline the All Ships Call Sending a Distress Call Distress CallsDesignated Distress Call Undesignated Quick Distress CallTo cancel the automatic Distress resend press CLEAR/WX Receiving a Distress Call Cancelling a Distress Call Made in ErrorReceiving a Distress Relay Sent by Another Station Receiving a Distress ACK Sent from a Coast StationSpecifying the Target Vessel Position RequestIf using Manual Mmsi ID entry Retrieving the Last Received Position Data When no reply is received within 3 minutesReceiving a Position Request From Another Station Call LogMaking a Call from a Call Log Entry Press and hold the SCAN/SAVE key Saving an Mmsi ID Number from a Call Log EntryDSC Distress Log Menu Function Menu SettingsUsing the Microphone Keys to Make Selections Adding an Entry DSC PhonebookUse same procedure to enter the Mmsi characters Editing an Existing Entry Deleting an Existing Entry Contrast Adjustment Backlight AdjustmentLocal / Distant When GPS Information Not Available GPS/Time SetupRotate the CH knob to scroll through the selections Settings Menu Settings Time Display Latitude/Longitude DisplayTime Offset Time FormatBand Radio SetupChannel CH Name Ring VolumeKey Beep DSC Setup My Mmsi ID Group Mmsi Setup Group Name Menu Settings Editing an Existing Entry Position Reply Automatic Channel Changing for Incoming Calls Procedure When Disabled Procedure When EnabledResetting Factory Defaults How to Contact Raymarine Customer ServiceProduct Repair and Service On the InternetTechnical Support Accessories and PartsGeneral Appendix a SpecificationsPLL Transmitter ReceiverMarine VHF Channels and Frequencies Appendix B Channel ListXmit RCV 86Ray54 VHF Radio Freq Use 82A WC, EC Canadian Marine VHF Channels and FrequenciesAC, GL PC, AC, GLAC, GL, PC 156.750 All areas90Ray54 VHF Radio 156.875 EC, PCAC, GL, NL Area of OperationInternational Marine VHF Channels & Frequencies 94Ray54 VHF Radio 161.925 WX Channels North America only Appendix C Glossary VHF VOLNumerics IndexMmsi 101 102