WALKMAN User Guide
Getting Started
How to Use the Software
Music
Settings
Troubleshooting
Important Information
Specifications
Contents list
Search | |
|
|
Top page > Getting Started > Before Use > Water Resistant Specifications
Water Resistant Specifications
Scenarios (*1)
Water resistant performance of this “WALKMAN”
Notes on charging the battery
Notes on using your “WALKMAN”
Cleaning after use
Scenarios (*1)
You can use your “WALKMAN” while jogging or walking in the rain. You can continue to use your “WALKMAN” after perspiring.
After using your “WALKMAN,” you can wash it with fresh water at room temperature or gently running tap water. (*2)
(*1) Do not use your “WALKMAN” in places where inability to hear surrounding sound would be dangerous.
In all of the situations above, use your “WALKMAN” with the USB jack cover closed securely.
(*2) Follow the instructions described in “Cleaning after use.”
Water resistant performance of this “WALKMAN”
The water resistant specifications (*1) of this “WALKMAN” are equivalent to IEC60529 “Degrees of protection against ingress of water (IP Code)” IPX5 (*2) that specifies as “Degrees of protection against ingress of water.” Please note, however, that your “WALKMAN” is not completely
(*1) The water resistant specifications are met only when the USB jack cover of your “WALKMAN” is closed securely. Also note that the headphone sections are not
(*2) IPX5 (Degrees of protection against jets of water): Your “WALKMAN” will maintain its operability even when exposed to direct streams of water from any direction in a situation where approximately
12.5l/min of water is supplied for more than 3 minutes from a distance of about 3 m using a nozzle with an inner diameter of 6.3 mm. However, this does not apply with the headphone sections.
Headphone section (not
USB jack cover
Liquids that the water resistant performance specifications apply to
Applicable fresh water, tap water, perspiration
16