Clock Setting, Radio Operations, Battery Care

NOTE: Only use a well-known brand of cell battery to ensure the longest life and best performance.

BATTERY CARE

i.If the unit is not used for an extended period of time, remove the battery. An old or leaking battery can cause damage to the unit and may void the warranty.

ii.Do not dispose batteries in fire. Batteries may leak or explode.

iii.Do not try to recharge batteries that are not intended to be recharged; they can overheat, rupture and leak (Follow battery manufacturer’s directions).

iv.Only an adult should replace the battery.

CLOCK SETTING

NOTE:

i.The clock has to be set the first time you plug the unit in.

ii.The Clock is set to default in 12 Hour mode.

With the unit in standby mode (power OFF):

Setting 12/24 Hour format

1.) Press and hold the CLOCK ADJUST (CLK. ADJ) button until 12H or 24H

appears flashing on the display. Press the or buttons to switch

between 12 hour (12H) or 24 hour (24H) format.

2.) Press the CLK.ADJ button to confirm, the Hour digit(s) will flash to prompt for input.

Setting the Clock

3.) To set the hour, repeatedly press the or buttons to select the correct hour digit(s). Press and hold the buttons to speed the forward or reverse scanning of the digits.

NOTE: Make sure the hour is set so that AM or PM is displayed correctly.

4.) Press the CLK.ADJ button to confirm the hour setting and the minute digits flash to prompt for input.

5.) To set the minutes, repeatedly press the or buttons to select the

correct minute digits. Press and hold the buttons to speed the forward or reverse scanning of the digits.

6.) Press the CLK.ADJ button again to complete the clock setting.

RADIO OPERATIONS

Tuning the Radio

1.) Press the POWER ON/STANDBY button located on top of the main unit or on the remote control to turn on the unit. Press the FUNCTION button repeatedly to select the FM mode.

2.) Repeatedly press the or buttons to manually tune to a desired station.