Jensen JIMS-260I user manual Normal Playback, Play/Pause Control, Stop Control, Skip/Search Track

Page 15

Normal Playback

After loading the disc, the disc will begin spinning and the total number of the tracks on the disc will be shown on the display for a while. Then the CD Player will automatically play the CD start from the first track and the display will show the playback time of the current track.

NOTE: If there is no disc in the unit or the loaded disc is not recognized by this player, “no cd” will be shown on the display.

Play/Pause Control

To pause temporarily during the CD playback, press the

button. The disc will

pause and the current playing track number will show on the display and flashing.

Press the

button again to resume playback.

Stop Control

To stop the CD playback, press the button on the unit or on the remote control. The CD will stop playback and the whole tracks of the disc will indicate on the display.

Skip/Search Track

During playback, press the or button to skip to the next or previous tracks.

During playback, press and hold the or button to search forwards or backwards through the current track. When the desired part of the track is reached, release the button and playback will resume.

To Check the Actual Time:

In CD mode, press the TIMER button once to check the actual time. The clock will display for 5 seconds and then go back CD track / play time mode a few seconds.

Play Mode Control

Repeat the Current Track

In CD playback mode, select the track to be repeated and begin playback. Tap the PLAY MODE button once. The “RPT” icon will appear and flash on the display. The selected track will be repeated playback continuously.

Repeat All Track

Tap the PLAY MODE button twice. The “RPT” icon will be shown on the display steadily and all tracks on the disc will be repeated playback continuously.

Tap the PLAY MODE button again to cancel repeat playback function, and normal playback will resume. The “RPT” will be disappeared on the display.

RANDOM Playback

The Random playback feature allows you to play all the tracks on the current disc in a random order. This function can be selected when the disc is playing or in stop mode. Press and hold the PLAY MODE button to enter random playback mode. The “RDM” will be indicated on the display.

Press and hold the PLAY MODE button to cancel the random play mode and resume to normal playback.

14

Image 15
Contents JiMS-260i Dear Jensen Customer Important Safety Instructions On Placement On Protection Against Laser Energy ExposureOn Condensation Compliance with FCC Regulations Precaution for USEProtect Your Furniture Product FeaturesInstallation For Table TOP USEFor Wall Mounting Main Unit Location of ControlsRemote Control Getting Started Connecting the AC PowerTuning the Radio Clock SettingBattery Care Setting the ClockSetting the Radio Station Presets Recall Preset Radio StationsHints for the Best Reception IPod/iPhone playback control ConnectingLoading The Discs CD OperationsStop Control Play Mode ControlNormal Playback Play/Pause ControlProgrammed CD Playback Sleep TimerWake Timer Operations Setting the wake timerAuxiliary Input Preset EQ Remote Control onlyResetting Care and MaintenanceCompact Disc Care Cleaning the Unit Symptom Possible Problem Solution Troubleshooting GuideSpecifications Power RequirementFrequency Range DAY Limited Warranty and Service Valid in the U.S.A only