Preset EQ Remote Control only, Auxiliary Input

5). Press the TIMER button to confirm, wake up source flashing. Press the or

button to select a source you want to wake to.

6). Press the TIMER button to confirm, Press the or buttons to set the wake volume level.

7). Press TIMER button to confirm,

Note: When “Wake to Radio” is selected, make sure the radio station you want to wake to is tuned. If “Wake to iPod” or “Wake to CD” is selected but an iPod

/iPhone is not docked or CD is not loaded, the alarm source will be redirected to the radio automatically when the wake time is reached.

8.) If you want to switch off the wake timer, tap the TIMER button and the TIMER icon disappears from the display.

9.) When the wake time is reached, the selected source, radio, CD or iPod/iPhone will begin to play. The wake timer continues to sound for 60 minutes if no button is pressed and the unit will reset itself for the following day.

10.) To stop the wake timer after the preset time is reached and the source begins to play, press either the POWER button or the TIMER button once.

PRESET EQ (REMOTE CONTROL ONLY)

This unit provides 4 different EQ modes to enhance your listening experience. You can select the desired effect by pressing the “EQ” button on remote control repeatedly at following sequence:

Off		ROCK		CLASSIC		JAZZ		POP

Mute Button (By Remote Control)

-Press the MUTE button on remote control to mute the sound output from speaker temporarily, MUTE icon will appear on display and flashing.

-Press the MUTE button again to resume to normal speaker playback.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio devices like MP3 players, CD players and older, non-dockable iPods (except iPod shuffle 3rd gen) and listen to your external source through the speakers of this system.

1.Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable.

2.Plug one end into the Aux-in jack on the main unit and the other end of the cable into the Line-out Jack or Headphone Jack of your external audio device.

3.Turn on the external audio device.