Motorola CP100 manual Programming the Interference Eliminator Code

Page 28

Programming Features

Programming the Interference Eliminator Code

 

 

 

 

 

 

The Interference Eliminator Code helps minimize interference by

 

 

 

 

 

 

 

 

 

 

 

 

providing you with code combinations, which filter out static, noise,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and unwanted messages.

Interference

1.

Enter Programming Mode as necessary, refer to “Entering

 

Programming Mode” on page 20.

Eliminator

 

01075

2.

Press \ until the Interference Eliminator Code display number

Code

 

 

 

 

 

 

 

begins to flash.

 

 

 

 

 

 

3.

Press [ or ] to select the desired Code (See “Interference Eliminator Codes”

 

beginning on page 37).

 

 

 

 

 

 

4.

Press and hold M to exit k, or press \ to continue.

 

 

 

 

 

 

Assigning Channels to Presets (15 ch models only)

Presets allow you to easily switch to more frequently-used channels.

1.Enter Programming Mode as necessary, refer to “Entering Programming Mode” on page 20.

2.Press [ or ] to select the desired channel.

3.Press and hold T or S to assign that channel to a preset, radio beeps to confirm. All of the channel settings are assigned to that preset button.

4.Press and hold M to exit k, or press \ to continue.

22

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CP100 Page Table of Contents Frequencies and Bandwidths Product Safety and RF Exposure Compliance Product Safety and RF Exposure Compliance Introduction Package ContentsIntroduction USA/Canada FCC Licensing Information FCC Licensing InformationFCC Licensing Information Getting Started Installing the Swivel Belt HolsterGetting Started Getting Started Charging the CP100 Radio Adjusting the Volume Using the RadioStarted Turning Your Radio On or OffUse J to Monitor the frequencyUnderstanding the Display Battery and Charging Options Battery and Charging OptionsNiMH Battery Alkaline BatteriesCharging with the Drop-in Charging Tray NNTN4019Reading the Battery Meter BatteryBattery Life CP100 Factory Defaults CP100 Factory DefaultsSignal Strength Indicator/Channel Busy Talking and ReceivingTalking and Receiving Talk RangeKeypad Lock With Compatible VOX AccessoriesHands-Free Use/VOX Without Accessories Setting VOX SensitivityReceiving TalkingMonitoring a Channel Check for channel activity Scan Advancement / Nuisance Delete Programming Features Programming FeaturesEntering Programming Mode Programming a Channel 15 ch models only Programming the FrequencyAssigning Channels to Presets 15 ch models only Programming the Interference Eliminator CodeProgramming the Scramble Feature 2-watt models only Programming Bandwidth when FCC allowableProgramming the Available Channel 15 ch models only Programming Call TonesProgramming Microphone Gain Editing the Scan List 15 ch models only CloningSource radio Target radio Advanced Features You turn on your radioTurn Keypad Tones on/off Turn End-of-Transmission Tone on/offToggle Phase Shift Turn Battery Save on/offRestore Factory Defaults Troubleshooting TroubleshootingSymptom Try This Heavy static or Troubleshooting Symptom Try This Use and Care Use and CareIf the radio is submerged in water Frequencies and Bandwidths VHF FrequenciesFrequencies and Bandwidths UHF Frequencies461.1375 Interference Eliminator Codes Digital Interference Eliminator Codes 100 101 102 103 104 105 106 107 108 109 Verifying the SP21 Frequency and Code Setting Motorola Limited Warranty Motorola Limited WarrantyII. What the Period of Coverage Is III. Who Is CoveredIV. What We Will Do to Correct Warranty Problems Text TelephoneVI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions Product Services 1-800-927-2744 All Products IX. State Law and Other Jurisdiction RightsSoftware Copyright Notice Patent NoticeExport Law Assurances Replacement Parts Replacement PartsPart Number Description Index Licensing information VOX CP100 Programming Quick Reference 15 CH Page 6804112J99
Top Page Image Contents