Motorola CP100 manual Receiving, Talking, Without Accessories, Setting VOX Sensitivity

Page 23

Without Accessories

You can operate a CP100 15 channel radio hands-free without a VOX accessory.

1.Enable VOX by pressing M while turning the radio on. g displays.

2.You can disable VOX operation temporarily by pressing M, g will flash.

3.A short press of M will re-enable VOX.

4.To disable VOX, turn radio off then back on.

Setting VOX Sensitivity

You can adjust the sensitivity of your radio’s accessory or microphone during VOX operation (15 ch models only) to suit different operating environments. These menus appear only if the VOX feature is in use, which is indicated by g.

1. Press \until g appears. The radio also displays which VOX sensitivity you are

Receiving

setting:

H= External VOX (with audio accessory)

I = Internal VOX (without accessory; 15 ch models only)

2.Press [ or ] to select the sensitivity level.

0 = Off (VOX with accessories only, default settings)

1 = Low sensitivity

2 = Medium sensitivity

3 = High sensitivity

H

3

External VOX

Talking and

17

Image 23

Contents CP100 Page Table of Contents Frequencies and Bandwidths Product Safety and RF Exposure Compliance Product Safety and RF Exposure Compliance Introduction Package ContentsIntroduction USA/Canada FCC Licensing Information FCC Licensing InformationFCC Licensing Information Getting Started Installing the Swivel Belt HolsterGetting Started Getting Started Charging the CP100 Radio Turning Your Radio On or Off Adjusting the VolumeUsing the Radio StartedMonitor the frequency Use J toUnderstanding the Display Alkaline Batteries Battery and Charging OptionsBattery and Charging Options NiMH BatteryNNTN4019 Charging with the Drop-in Charging TrayBattery Life BatteryReading the Battery Meter CP100 Factory Defaults CP100 Factory DefaultsTalk Range Signal Strength Indicator/Channel BusyTalking and Receiving Talking and ReceivingHands-Free Use/VOX With Compatible VOX AccessoriesKeypad Lock Talking Without AccessoriesSetting VOX Sensitivity ReceivingMonitoring a Channel Check for channel activity Scan Advancement / Nuisance Delete Entering Programming Mode Programming FeaturesProgramming Features Programming the Frequency Programming a Channel 15 ch models onlyProgramming the Interference Eliminator Code Assigning Channels to Presets 15 ch models onlyProgramming Bandwidth when FCC allowable Programming the Scramble Feature 2-watt models onlyProgramming Call Tones Programming the Available Channel 15 ch models onlyProgramming Microphone Gain Cloning Editing the Scan List 15 ch models onlySource radio Target radio Turn End-of-Transmission Tone on/off Advanced FeaturesYou turn on your radio Turn Keypad Tones on/offRestore Factory Defaults Turn Battery Save on/offToggle Phase Shift Symptom Try This TroubleshootingTroubleshooting Heavy static or Troubleshooting Symptom Try This If the radio is submerged in water Use and CareUse and Care VHF Frequencies Frequencies and BandwidthsUHF Frequencies Frequencies and Bandwidths461.1375 Interference Eliminator Codes Digital Interference Eliminator Codes 100 101 102 103 104 105 106 107 108 109 Verifying the SP21 Frequency and Code Setting III. Who Is Covered Motorola Limited WarrantyMotorola Limited Warranty II. What the Period of Coverage IsText Telephone IV. What We Will Do to Correct Warranty ProblemsVI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions IX. State Law and Other Jurisdiction Rights Product Services 1-800-927-2744 All ProductsPatent Notice Software Copyright NoticeExport Law Assurances Part Number Description Replacement PartsReplacement Parts Index Licensing information VOX CP100 Programming Quick Reference 15 CH Page 6804112J99