Motorola CP100 manual Troubleshooting Symptom Try This

Page 38

Troubleshooting

	Symptom	Try This:

	Low batteries	Recharge or replace battery or batteries. Extreme operating
	Low batteries	temperatures affect battery life. See “Battery Life” on page 13.


		Reinsert radio/battery.
	Charger light	Clean battery/charger contacts.
	does not come	Verify that the charging pin is inserted correctly.
	on	Verify that the charging pin is inserted correctly.
		AA cells installed in radio, remove and replace with NiMH battery.

	Low battery
	meter reading	Verify that the radio is set to the correct battery type (Single-cell
	although new
	although new	batteries only). See “Alkaline Batteries” on page 11.
	batteries are	batteries only). See “Alkaline Batteries” on page 11.
	batteries are
	installed

	Cannot activate	Feature not set and on. See “Hands-Free Use/VOX” on page 16.
	Cannot activate
	VOX	Sensitivity set to 0. See “Setting VOX Sensitivity” on page 17.

	Cannot enter	Unplug any audio accessories and retry.
	k mode	Unplug any audio accessories and retry.

32

Image 38

Contents CP100 Page Table of Contents Frequencies and Bandwidths Product Safety and RF Exposure Compliance Product Safety and RF Exposure Compliance Introduction Package ContentsIntroduction USA/Canada FCC Licensing Information FCC Licensing InformationFCC Licensing Information Getting Started Installing the Swivel Belt HolsterGetting Started Getting Started Charging the CP100 Radio Started Adjusting the VolumeUsing the Radio Turning Your Radio On or OffUse J to Monitor the frequencyUnderstanding the Display NiMH Battery Battery and Charging OptionsBattery and Charging Options Alkaline BatteriesCharging with the Drop-in Charging Tray NNTN4019Battery Life BatteryReading the Battery Meter CP100 Factory Defaults CP100 Factory DefaultsTalking and Receiving Signal Strength Indicator/Channel BusyTalking and Receiving Talk RangeHands-Free Use/VOX With Compatible VOX AccessoriesKeypad Lock Receiving Without AccessoriesSetting VOX Sensitivity TalkingMonitoring a Channel Check for channel activity Scan Advancement / Nuisance Delete Entering Programming Mode Programming FeaturesProgramming Features Programming a Channel 15 ch models only Programming the FrequencyAssigning Channels to Presets 15 ch models only Programming the Interference Eliminator CodeProgramming the Scramble Feature 2-watt models only Programming Bandwidth when FCC allowableProgramming the Available Channel 15 ch models only Programming Call TonesProgramming Microphone Gain Editing the Scan List 15 ch models only CloningSource radio Target radio Turn Keypad Tones on/off Advanced FeaturesYou turn on your radio Turn End-of-Transmission Tone on/offRestore Factory Defaults Turn Battery Save on/offToggle Phase Shift Symptom Try This TroubleshootingTroubleshooting Heavy static or Troubleshooting Symptom Try This If the radio is submerged in water Use and CareUse and Care Frequencies and Bandwidths VHF FrequenciesFrequencies and Bandwidths UHF Frequencies461.1375 Interference Eliminator Codes Digital Interference Eliminator Codes 100 101 102 103 104 105 106 107 108 109 Verifying the SP21 Frequency and Code Setting II. What the Period of Coverage Is Motorola Limited WarrantyMotorola Limited Warranty III. Who Is CoveredIV. What We Will Do to Correct Warranty Problems Text TelephoneVI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions Product Services 1-800-927-2744 All Products IX. State Law and Other Jurisdiction RightsSoftware Copyright Notice Patent NoticeExport Law Assurances Part Number Description Replacement PartsReplacement Parts Index Licensing information VOX CP100 Programming Quick Reference 15 CH Page 6804112J99