Motorola CP100 manual Heavy static or

Page 37

Symptom	Try This:

Steel and/or concrete structures, heavy foliage, buildings or

vehicles decrease range. Check for clear line of sight to improve

Limited talk transmission. See “Talk Range” on page 15. range

Message not

Wearing radio close to body such as in a pocket or on a belt decreases range. Change location of radio.

Confirm radios have the same Channel, Frequency, Interference Eliminator Code and Scramble Code settings, depending upon model. See “Programming Features” on page 20.

Recharge, replace and/or reposition batteries.

receivedMove to another location. Obstructions and operating indoors, or in vehicles may decrease range.

Heavy static or

Verify that the radio is not in Scan mode. See “Scanning (15 ch models only)” on page 18.

Radios are too close, they must be at least five feet apart.

Troubleshooting

interference Radios are too far apart or obstacles are interfering with transmission.

Keypad locked Unlock by holding \ for three seconds.

31

Image 37

Contents CP100 Page Table of Contents Frequencies and Bandwidths Product Safety and RF Exposure Compliance Product Safety and RF Exposure Compliance Introduction Package ContentsIntroduction USA/Canada FCC Licensing Information FCC Licensing InformationFCC Licensing Information Getting Started Installing the Swivel Belt HolsterGetting Started Getting Started Charging the CP100 Radio Using the Radio Adjusting the VolumeStarted Turning Your Radio On or OffMonitor the frequency Use J toUnderstanding the Display Battery and Charging Options Battery and Charging OptionsNiMH Battery Alkaline BatteriesNNTN4019 Charging with the Drop-in Charging TrayReading the Battery Meter BatteryBattery Life CP100 Factory Defaults CP100 Factory DefaultsTalking and Receiving Signal Strength Indicator/Channel BusyTalking and Receiving Talk RangeKeypad Lock With Compatible VOX AccessoriesHands-Free Use/VOX Setting VOX Sensitivity Without AccessoriesReceiving TalkingMonitoring a Channel Check for channel activity Scan Advancement / Nuisance Delete Programming Features Programming FeaturesEntering Programming Mode Programming the Frequency Programming a Channel 15 ch models onlyProgramming the Interference Eliminator Code Assigning Channels to Presets 15 ch models onlyProgramming Bandwidth when FCC allowable Programming the Scramble Feature 2-watt models onlyProgramming Call Tones Programming the Available Channel 15 ch models onlyProgramming Microphone Gain Cloning Editing the Scan List 15 ch models onlySource radio Target radio You turn on your radio Advanced FeaturesTurn Keypad Tones on/off Turn End-of-Transmission Tone on/offToggle Phase Shift Turn Battery Save on/offRestore Factory Defaults Troubleshooting TroubleshootingSymptom Try This Heavy static or Troubleshooting Symptom Try This Use and Care Use and CareIf the radio is submerged in water VHF Frequencies Frequencies and BandwidthsUHF Frequencies Frequencies and Bandwidths461.1375 Interference Eliminator Codes Digital Interference Eliminator Codes 100 101 102 103 104 105 106 107 108 109 Verifying the SP21 Frequency and Code Setting Motorola Limited Warranty Motorola Limited WarrantyII. What the Period of Coverage Is III. Who Is CoveredText Telephone IV. What We Will Do to Correct Warranty ProblemsVI. What this Warranty Does Not Cover VII. Some Other Limitations VIII. Patent and Software Provisions IX. State Law and Other Jurisdiction Rights Product Services 1-800-927-2744 All ProductsPatent Notice Software Copyright NoticeExport Law Assurances Replacement Parts Replacement PartsPart Number Description Index Licensing information VOX CP100 Programming Quick Reference 15 CH Page 6804112J99