Hitachi RAS-SX13HAK / RAC-SX13HAK NAMES AND FUNCTIONS OF EACH PART continued, Remote Controller

Page 6

NAMES AND FUNCTIONS OF EACH PART (continued)

REMOTE CONTROLLER

Transmits the operation and timer settings to the indoor unit.

The LCD shown in the illustration below is the display immediately after the reset switch is pressed. Usually not all the data are displayed. On the LCD shown below, the functions not available for this room air conditioner are also displayed.

BUTTONS TO

Transmission Part

 

START OPERATIONS

 

 

 

DEHUMIDIFY Button

 

Transmission Indicator

 

The transmission indicator

Press this button to start

 

 

lit when a signal is sent.

dehumidifying operation.

 

 

STOP Button

(Page 14)

 

HEAT Button

 

Press this button to stop any

 

operation except the preset timer.

Press this button to start

 

 

heating operation.

 

ROOM TEMPERATURE

(Page 14)

 

 

Button

 

 

COOL Button

 

Press this button to set the

Press this button to start

 

room temperature. Keep

cooling operation.

 

pressing and the value will

(Page 15)

 

change more quickly.

DRY COOL Button

 

HUMIDITY Button

 

Press this button to set the

Press this button to start dry

 

 

humidity for dehumidify and

cool operation. (Page 16)

 

 

dry cool operations.

 

 

AUTO Button

 

 

Press this button to

 

INFRARED HUMAN-PRESENCE

start automatic operation.

 

 

SENSING Button

(Page 13)

 

 

Press this button to enter

 

 

 

 

the dynamic air deflection mode.

 

 

(Page 19, 20)

 

AIR CLEANING Button

SLEEP TIMER Operation Button

 

Press this button to start plasma air

 

Press this button to start sleep timer

 

cleaning (air circulation) operation.

 

operation. (Page 29)

 

(Page 18)

 

 

Remote controller can be used when it is fixed on a wall or pillar using the remote controller holder.

Before fixing it, make sure the indoor unit can be controlled from the remote controller fixing point.

Screw

– 6 –

Page 5 Page 7
Image 6
Page 5 Page 7
Contents INDOOR UNIT OUTDOOR UNIT РУССКИЙ ∂ÏÏËÓÈο PORTUGUÊS SPANISH ITALIANO FRANÇAIS DEUTSCH ENGLISHRAS-SX10HAK / RAC-SX10HAK RAS-SX13HAK / RAC-SX13HAK RAS-SX10HAK RAS-SX13HAKPRECAUTIONS DURING OPERATION PRECAUTIONS DURING INSTALLATIONPRECAUTIONS DURING SHIFTING OR MAINTENANCE SAFETY PRECAUTIONENGLISH OUTDOOR UNIT NAMES AND FUNCTIONS OF EACH PARTINDOOR UNIT ABOUT OUTDOOR UNITINDOOR UNIT CONTROL PANEL / CLEANING UNIT How to Attach the Nano Titanium Air Cleaning Mesh PreparationBUTTONS TO REMOTE CONTROLLERNAMES AND FUNCTIONS OF EACH PART continued START OPERATIONSFUNCTION SELECTOR POWERFULL ButtonINSTALLING ANTI-MOLD WASABI CASSETTE 2 Install the anti-mold wasabi cassette1 Open the front panel Close the front panel 2 Performing operation check after the power is turned on FILTER CLEANING UNIT OPERATION CHECK1 Make sure the power plug is firmly plugged into the power outlet Perform the filter cleaning unit operation checkOpen the cover and press the RESET PREPARE THE REMOTE CONTROLLERInstall the batteries ABOUT ADDRESS SELECTOR SWITCHPREPARE THE REMOTE CONTROLLER continued Ampere setting Standard/Save can be selectedWHEN OPERATING THE REMOTE CONTROLLER STOP Adjust the room temperatureAUTOMATIC OPERATION AUTOMATIC OPERATIONHEATING OPERATION DEHUMIDIFYING OPERATIONDEHUMIDIFYING OPERATION continued COOLING OPERATIONDRY COOL OPERATION 16C~32C 40 ％～70 ％10C~32C Setting Range of AUTO/MANUAL OperationSTAINLESS PLASMA AIR PURIFYING FAN OPERATION POWERFUL OPERATIONCANCEL STOPINFRARED HUMAN PRESENCE SENSING FUNCTION Example CoolingDYNAMIC AIR DEFLECTION FUNCTION TRACING/EVASION Set the detection speed of the sensor to “Slow”Fine tune the detection speed of the sensor INTERNAL CLEANING OPERATION STOP WhileSLEEP OPERATION MOLD MONITOR OPERATION Vertical airflow swing ADJUSTING THE VERTICAL AIRFLOW DIRECTIONSet automatically Vertical air flow of your preferenceADJUSTING THE HORIZONTAL AIRFLOW DIRECTION Adjust the horizontal airflow directionHorizontal angle of your preference TIMER PRESET OPERATION How to preset the timerHow to preset the OFF TIMER ON TIMER How to cancel the preset timer ITALIANO FRANÇAIS DEUTSCHРУССКИЙ ∂ÏÏËÓÈο PORTUGUÊS SPANISH FURTHER CONVENIENT TIMER FUNCTION Combination of ON TIMER and DEHUMIDIFY buttonSLEEP TIMER OPERATION Combination of Sleep Timer and On Timer operationFILTER CLEANING OPERATION 1 Automatic filter cleaning operationITALIANO FRANÇAIS DEUTSCH ENGLISH Conditions under which automatic filter cleaning is performedAbout the noise during filter cleaning STOP Press3 Maintenance FILTER CLEANING OPERATION continued2 Manual filter cleaning operation HOW TO PROHIBIT THE FILTER CLEANING OPERATIONOperate the manual filter cleaning operation. Page Set to prohibit the filter cleaning operationReturn to the filter cleaning operation setting Set to prohibit the filter cleaning operation againStop the operation with the remote controller and MAINTENANCEMaintenance of dust box 3 Turn on the power supply or turn on the circuit breakerStop the operation with the remote Maintenance of Stainless Mesh Filtercontroller and unplug the power plug or turn off the circuit breakerTurn on the power supply or turn on the circuit breaker MAINTENANCE continuedMaintenance of mesh stainless filter continued Vacuum the dustStop the operation with the remote controller and unplug Maintenance of dust catcherthe power supply or turn off the circuit breaker Remove the front panelStop the operation with the remote controller Maintenance of electric dust collector electrodes4 Turn on the power supply. or turn on the circuit breaker and unplug the power supply or turn off theUNDERSTANDING THE OPERATING MECHANISM NAMES AND FUNCTIONS OF EACH PART PageTHE IDEAL WAYS OF OPERATION TROUBLESHOOTING FILTER CLEANING OPERATIONTROUBLESHOOTING continued PLEASE CHECK THE FOLLOWING BEFORE SERVICEANTI-MOLD WASABI CASSETTE THE FOLLOWING CASES DOES NOT INDICATE MALFUNCTION Automatic operation starts when the temporary switch Disconnect the power supplyReconnect the power supply Unplug the powerINSPECTION AND MAINTENANCE REGULAR INSPECTIONDuring preset of the mold monitor operation page OPERATION DISPLAY CHARTDuring internal cleaning operation page DisplayMEMO 474 A 室内机／室外机 РУССКИЙ ∂ÏÏËÓÈο PORTUGUÊS SPANISH ITALIANO FRANÇAIS 中 国 语室内机 室外机 分 体 式 冷 气 机搬移或修理时的注意事项 安全注意事项安装方面的注意事项 使用上的注意事项使用上的注意事项 各部的名称和功能 室外机的说明中 国 语 室内机操作部和清扫部纳米钛空清网的安装方法 各部的名称和功能 继续 可以使运转开始的按钮功能选择部 防霉芥末盒的安装 1 打开前面板。2 安装防霉芥末盒。 3 关上前面板。 过滤网清扫部的动作确认 1 将电源线可靠地接入电源中。 警告2 进行接通电源后的动作检查。 进行过滤网清扫部的动作检查。 打开盖板 请准备好遥控器装入电池。 用有尖细端头的物品按下复位请准备好遥控器 继续 4 能够设定电流值标准/节省切换。操作遥控器时 室温的微调节 自动运转自动运转 风速的切换可设定的温度范围为16C ~ 32C。 制热运转乾爽除湿运转 围为 40% ~ 70% 。乾爽除湿运转 继续 制冷运转凉快运转 50 ％～60 ％ 干燥除湿、凉快运转的自动/手动切换10 ～32 16 ～32不锈等离子空气清净送风运转 全功率运转乾爽除湿 红外线人体检知传感器 以冷房运转为例传感器的检测速度设定为「慢速」 动态导风（追踪/回避）运转机能以暖房运转为例 传感器检测速度微调内部清洁运转 快眠运转 功能选择 钮霉菌监视运转 上下风向摆动 上下风向的调节自动设定 上下喜好风向左右风向的调节 左右风向的摆动左右喜好调节 定时器预约运转 1 按3 按 定时器的预约方法4 按 定时预约的取消方法更方便的定时器使用方法 开机定时 与 乾爽除湿 钮的组合开机定时 进行第二天早上的运转等。 睡眠定时运转睡眠定时运转和开机定时的组合 1 预约 开机定时。 74, 75页过滤网清扫运转 1 自动过滤网清扫运转在过滤网清扫运转结束时 , 返回到 进行自动过滤网清扫运转的条件 过滤网清扫运转时的声音2 手动过滤网清扫运转 3 维护过滤网清扫运转（继续） 过滤网清扫运转禁止的设定方法1 过滤网清扫运转禁止的设定方法。 2 重新设定过滤网清扫运转禁止的方法。 3 进行手动过滤网清扫运转 80页 4 再一次设定过滤网清扫运转禁止的方法。 1 , 2 , 4 的设定方法, 80页清洁 指示灯反复出现闪烁、亮灯和变暗现象。非故障 接入电源。 或打开断路器） 集尘盒的保养方法请用遥控器停止操作， 断开电源。 或者切断断路器 用水清洗集尘盒。 在清扫机体前，请使用遥控器停止操作或者切断断路器。3 拆下前面板。 不锈过滤网的保养方法1 请用遥控器停止操作，并断开电源。 或者切断断路器 2 打开前面板。 4 拆下前面的不锈过滤网。5 用吸尘器等吸掉灰尘。 维护（继续）不锈过滤网的保养方法（继续） 6 安装不锈过滤网。或者切断断路器 。 捕尘器的保养方法请用遥控器停止操作，并断开电源。 拆下捕尘器。1 请用遥控器停止操作，并断下电源。 或者切断断路器 2 请用双手轻轻打开上下导风板。 注意 维护 继续电气集尘器电极的保养方法 3 用牙刷清除电气集尘器电极的脏污。运转的原理和希望用户事前了解的事项 各部的名称和功能 52页拉上窗帘或百叶遮帘, 可以减少热量的进出, 更有效地用电。 2. 请时常换气。 注意 如果与燃气器具同一室使用时，必要进行换气。 更理想的使用方法1. 建议用户设定为“恰当的室温”, 既省钱又有益於身体。 请不要将室温设定得过低或过高。对健康不利，且浪费电力。 3. 要外出时, 可有效利用霉菌监视功能。 （请参照霉菌监视运转） 4. 就寝时, 可有效利用定时功能。遇到问题时 过滤网清扫部的动作的说明遇到问题时 继续 防霉芥茉盒的说明请服务人员维修以前，请先检查以下事项 这非有故障 运转 指进行暂时运转时，请先断开电源。 或切断断路器。） 再次接入电源。或打开断路器。） 出现下述情况时,请迅即向销售店咨询暂时运转 按下暂时运转开关后, 会进行自动运转。定期检查 检查整备运转显示快查表 内部清洁运转中Page 474 A
Top Page Image Contents