Motorola P110 operating instructions Recycling or Disposal of Batteries, Inmetco

Page 2

WARNING

Certain combinations of chemical environments can adversely affect thermoplastic resins. For this reason, lubricants, cleaning agents, sol- vents or any other material which may come in contact with the finished parts should be care- fully evaluated for compatibility. We recommend a mild dishwashing soap for cleaning the exte- rior of the product.

Recycling or Disposal of Batteries

This product is powered by a nickel-cadmium (Ni-Cad) recharge- able battery. At the end of its useful life, the battery can be recy- cled. However, recycling facilities may not be available in all areas. Under various state or local laws, the battery must be recycled or disposed of properly and cannot be disposed of in landfills or incinerators.

In addition, U.S. Environmental Protection Agency (EPA) regula- tions classify used Ni-Cad batteries as hazardous waste, unless certain exemptions apply.

Motorola fully endorses and encourages the recycling of Ni-Cad batteries. If you are located in the United States, you can ship post paid your used Ni-Cad batteries to INMETCO, an EPA approved recycling facility, at this address:

INMETCO

P.O. Box 720

245 Portersville Road

Ellwood City, PA 16117

Telephone: (412) 758-5515

Fax: (412) 758-9311

Consideration should be given to the methods of collecting, labeling, and shipping used Ni-Cad batteries. Your federal, state or locate EPA should be consulted for specific legal require- ments and for recycling options in your area.

Motorola, as a responsible corporate citizen, has always been concerned with the protection of the environment. Please feel free to call the phone number 1-800-422-4210 for further infor- mation.

Image 2
Contents P110 Recycling or Disposal of Batteries InmetcoContents Introduction Welcome To The Motorola Radius P110 RadioPackaged Model Contents InspectionRotary Channel Selector Switch Controls, Switches, Indicators, and ConnectorsOn/Off/Volume Control LED IndicatorAntenna Push-To-Talk PTT ButtonControl Button Time-Out Timer Alert Tone IndicatorsPower-Up Transmit on Blank or Receive Only ChannelsLow Battery Alert Scan and Signalling Alert Tones Receive Mode PTT Button Not Pressed Multifunction LED IndicatorsTransmit Mode PTT Button Pressed Channel Scan Functions Default Per Radio Functions DefaultPer Channel Functions Default Signalling Functions DefaultAntenna Installation Getting StartedBattery Installation or Replacement To Install BatteryMethod a Method BTo Receive To Power-UpOperation To Transmit Set the channel selector to the desired channel positionOperation with Standard Features Volume SetBusy Channel Lockout Dtmf Telephone Interconnect Dtmf Telephone Interconnect OperationOptional Enhancements Channel ScanOptional Enhancements Voice Selective Call Signalling EnhancementsCall Alert Recharging Nickel Cadmium Batteries Battery InformationCharging Temperature Memory Effect Reduced Charge Capacity Nickel-Cadmium Battery DisposalShort Circuit Battery Charger Operating Instructions P110 To Operate Charger Battery Charger Vehicular Accessories AccessoriesCarrying Accessories AntennasBatteries Nickel-Cadmium Battery ChargersAudio/RF Accessories Troubleshooting Service General Radio Care Safety Information Computer Software Copyrights United Kingdom contact Licensing InformationCanada contact Japan contact Mexico contactSingapore contact Hong Kong Contact