Motorola P110 operating instructions Short Circuit, Memory Effect Reduced Charge Capacity

Page 25

P110 Portable Radios

Battery Information

to ensure that the battery is charged within these tempera- ture limits. If the charger is not performing a rapid rate charge, the charger’s LED flashes red to indicate that the battery is being charged at a slow trickle rate. For additional information on batteries and battery charging, refer to the battery charger information in the service manual.

Short Circuit

Care should be taken to avoid external short-circuiting of the battery.

CAUTION

A sustained high rate discharge (e.g., a paper clip placed accidentally across the battery con- tacts) may permanently damage the battery, void the battery warranty, and create a burn or fire hazard.

Memory Effect (Reduced Charge Capacity)

The Memory Effect was a phenomenon which caused a temporary loss in battery capacity or voltage due to repeti- tive shallow discharging or low term overcharging. This Memory Effect has been virtually eliminated in Motorola batteries with the use of the latest in cell technology from our selected cell suppliers.

Nickel-Cadmium Battery Disposal

For disposition, Nickel-cadmium sealed rechargeable bat- teries should be delivered to an authorized metals reclama- tion dealer (refer to inside front cover of this manual).

WARNING

DO NOT DISPOSE OF ANY BATTERIES IN A

FIRE AS THEY MAY EXPLODE!

March, 1996

6880902Z28-E

23

Image 25
Contents P110 Inmetco Recycling or Disposal of BatteriesContents Welcome To The Motorola Radius P110 Radio IntroductionInspection Packaged Model ContentsOn/Off/Volume Control Controls, Switches, Indicators, and ConnectorsRotary Channel Selector Switch LED IndicatorControl Button Push-To-Talk PTT ButtonAntenna Power-Up Alert Tone IndicatorsTime-Out Timer Transmit on Blank or Receive Only ChannelsLow Battery Alert Scan and Signalling Alert Tones Transmit Mode PTT Button Pressed Multifunction LED IndicatorsReceive Mode PTT Button Not Pressed Per Channel Functions Default Per Radio Functions DefaultChannel Scan Functions Default Signalling Functions DefaultGetting Started Antenna InstallationTo Install Battery Battery Installation or ReplacementMethod B Method aOperation To Power-UpTo Receive Set the channel selector to the desired channel position To TransmitVolume Set Operation with Standard FeaturesBusy Channel Lockout Dtmf Telephone Interconnect Operation Dtmf Telephone InterconnectChannel Scan Optional EnhancementsOptional Enhancements Call Alert Signalling EnhancementsVoice Selective Call Charging Temperature Battery InformationRecharging Nickel Cadmium Batteries Short Circuit Nickel-Cadmium Battery DisposalMemory Effect Reduced Charge Capacity Battery Charger Operating Instructions P110 To Operate Charger Battery Charger Carrying Accessories AccessoriesVehicular Accessories AntennasAudio/RF Accessories Nickel-Cadmium Battery ChargersBatteries Troubleshooting Service General Radio Care Safety Information Computer Software Copyrights Canada contact Licensing InformationUnited Kingdom contact Singapore contact Mexico contactJapan contact Hong Kong Contact