Motorola CP150TM, CP200TM manual Getting Started, Wall Charger, Charging Your Battery

Page 19

GETTING STARTED

BATTERY INFORMATION

Charging Your Battery

If a battery is new, or its charge level is very low, you will need to charge it before you can use it. When the battery level is low and the radio is in transmit mode you will see the LED indicator flash red. Upon release of the PTT button, you will hear an alert tone.

Note: Batteries are shipped uncharged from the factory. Always charge a new battery 14 to 16 hours before initial use, regardless of the status indicated by the charger.

Note: Do not use the wall charger and desktop charger at the same time when charging.

WALL CHARGER

Note: Do not use the wall charger if using lithium-ion (Li-Ion) or nickel-metal hyride (NiMH) batteries. The wall charger is for nickel-cadmium (NiCd) batteries only.

To Charge the Battery

1Turn the radio off.

2Lift the dust cover to expose the audio accessory connector.

3Insert the charging adapter into the accessory connector.

4Plug the charging adapter into an electrical outlet.

The LED on the charging adapter lights Red while the charger is plugged into an electrical outlet.

Note: Do not leave the charger connected to the radio when it is not connected to the electrical outlet.

5Unplug the charger from the electrical outlet and radio after 10 hours.

Note: After the initial charge of 14 to 16 hours, do not charge the battery more than 10 hours.

17

GETTING STARTED

English

Image 19
Contents CP150/CP200 Page Contents Scan AccessoriesComputer Software Copyrights Radio CallsCharging Batteries Safety and WarrantyMotorola Limited WarrantyII. General Provisions Safety and Warranty What this Warranty does not Cover VII. Governing LAW Warranty Introduction FeaturesRadio Wide Features Signaling FeaturesIntroduction Parts of the Radio Radio OverviewCP150/CP200 Models Push-to-Talk PTT Button On/Off/Volume KnobLED Indicator Channel Selector KnobProgrammable Buttons Feature Short Press/Long Press Hold Down Button Programmable Buttons Indicator Tones Audio Indicators forCompanding Improved Audio FeaturesGetting Started Charging Your BatteryWall Charger Rapid Charger Desktop ChargersSlow Charger Removing the Battery Accessory InformationAttaching the Battery Attaching the Antenna Removing the Antenna Attaching the Belt Clip Removing the Belt Clip Turning the Radio on or OFF Adjusting the VolumeSelecting a Radio Channel Monitoring ReceivingTransmitting Enabling or Disabling VOX ENABLE/DISABLE Headset SidetoneConnecting a VOX Headset VOX OperationSetting Tight or Normal Squelch Repeater or Talkaround ModeNon-VOX Headset with In-Line PTT Available for 4W and 5W models only Setting the Power LevelGetting Started Receiving a Selective Call Radio CallsReceiving a Call Alert Radio Calls Scan Restoring a Channel to the Scan List Deleting a Nuisance ChannelPrioritizing a Scan List Member Scan Batteries AccessoriesCarry Accessories ChargersSurveillance Accessories HeadsetsEAR Microphone Systems Remote Speaker MicrophonesMiscellaneous AntennasCP150 /CP200 Quick Reference Card Turning Off the Radio Page 6880309N60