Motorola CP200TM, CP150TM manual Repeater or Talkaround Mode, Setting Tight or Normal Squelch

GETTING STARTED

4To disable the headset sidetone, turn off your radio and turn the radio on again.

Non-VOX Headset with In-Line PTT

1Turn off your radio.

2Connect the non-VOX accessory to your radio.

3Press and hold the In-line PTT on your headset.

4Turn the radio on and release the PTT once the radio has completed start-up. During transmit, you will hear your voice through the headset while you speak.

5To disable the headset sidetone, turn off your radio and turn the radio on again.

26

REPEATER OR TALKAROUND MODE

Talkaround Mode enables you to communicate with another radio when either:

•the repeater is not operating

– or –

•your radio is out of the repeater’s range but within communicating distance of another radio.

Press the preprogrammed Repeater/ Talkaround button (see page 14) to toggle between Repeater mode and Talkaround Mode.

SETTING TIGHT OR NORMAL SQUELCH

Use this feature to filter out nuisance (unwanted) calls and/or background noise. However, tightening squelch could cause calls from remote locations to be filtered out as well. In this case, normal squelch may be more desirable.

Press the preprogrammed Squelch button (see page 14) to toggle between tight and normal squelch.

English