SCAN
DELETING A NUISANCE CHANNEL
Note: Your dealer must preprogram a button to Nuisance Delete (see page 14) to access this feature.
If a channel continually generates unwanted calls or noise (a “nuisance” channel), you can temporarily remove it from the scan list:
1While the radio is on the Nuisance Channel, press the preprogrammed Nuisance Channel Delete button until you hear a tone.
2Release the Nuisance Channel Delete button. The nuisance channel is deleted.
Note: You cannot temporarily delete the channel that has been prepro- grammed as your designated scan channel, a priority channel, or the last remaining channel in the scan list.
32
Restoring a Channel to the Scan List
1Power off the radio. Once the radio is powered on again, the deleted nuisance channels are restored to the scan list.
–or –
1Press the preprogrammed Scan button to stop the scan.
2Press the preprogrammed Scan button again to start scanning again. The Deleted Nuisance Channels are restored to the scan list.
–or –
1Select a different channel. Once you return to the original channel, the deleted nuisance channels are restored to the scan list.
English