Motorola CP150TM, CP200TM manual Scan

Page 33

SCAN

Your radio is equipped with the Scan feature, which allows you to monitor multiple channels for voice activity. The radio will stop on a channel when it detects activity on it.

Your radio automatically switches to a channel within the scan list when it detects activity.

The LED indicator blinks green during a scan operation and stops blinking when the radio switches to a channel.

There are two types of Scan available in your radio:

System Scan

Auto Scan

TALKBACK

The Talkback feature allows you to respond to a transmission while scanning. If a transmission is detected on a channel while scanning, the radio will stop on that channel for a default period of time after activity has ceased. This is referred to as “hangtime”. During this hangtime you may respond by pressing the PTT button.

Note: The LED scan indicator stops blinking while the radio is in hangtime. If the PTT button is not pressed during the preprogrammed hangtime, the radio returns to scanning channels.

STARTING SYSTEM SCAN

Press the preprogrammed Scan button (see page 14).

STOPPING SYSTEM SCAN

Press the preprogrammed Scan button.

STARTING AUTO SCAN

Auto Scan automatically starts scanning once a channel with Auto Scan enabled is selected.

Select the channel that your dealer has preprogrammed for Auto Scan.

STOPPING AUTO SCAN

Select a channel that has not been preprogrammed for Auto Scan.

31

SCAN

English

Image 33
Contents CP150/CP200 Page Contents Computer Software Copyrights AccessoriesRadio Calls ScanCharging Batteries Safety and WarrantyMotorola Limited WarrantyII. General Provisions Safety and Warranty What this Warranty does not Cover VII. Governing LAW Warranty Radio Wide Features FeaturesSignaling Features IntroductionIntroduction Radio Overview Parts of the RadioCP150/CP200 Models LED Indicator On/Off/Volume KnobChannel Selector Knob Push-to-Talk PTT ButtonProgrammable Buttons Feature Short Press/Long Press Hold Down Button Programmable Buttons Indicator Tones Audio Indicators forCompanding Improved Audio FeaturesCharging Your Battery Getting StartedWall Charger Rapid Charger Desktop ChargersSlow Charger Accessory Information Removing the BatteryAttaching the Battery Attaching the Antenna Removing the Antenna Attaching the Belt Clip Removing the Belt Clip Adjusting the Volume Turning the Radio on or OFFSelecting a Radio Channel Receiving MonitoringTransmitting Connecting a VOX Headset ENABLE/DISABLE Headset SidetoneVOX Operation Enabling or Disabling VOXRepeater or Talkaround Mode Setting Tight or Normal SquelchNon-VOX Headset with In-Line PTT Available for 4W and 5W models only Setting the Power LevelGetting Started Radio Calls Receiving a Selective CallReceiving a Call Alert Radio Calls Scan Restoring a Channel to the Scan List Deleting a Nuisance ChannelPrioritizing a Scan List Member Scan Carry Accessories AccessoriesChargers BatteriesSurveillance Accessories HeadsetsEAR Microphone Systems Remote Speaker MicrophonesMiscellaneous AntennasCP150 /CP200 Quick Reference Card Turning Off the Radio Page 6880309N60