Icom IC-M32 instruction manual Call channel programming

4 BASIC OPERATION

■ Call channel programming

The call channel key is used to select Channel 9 by default,	t Push [16•9] to program the dis-
however, you can program your most often-used channel in	played channel as the call chan-
each channel group for quick recall.	nel.

qPush [CH/WX•U/I/C] for 1 sec. several times to select the desired channel group (USA, INT, CAN) to be programmed.

wPush [16•9] for 1 sec. to select the call channel.

•“CALL” and call channel number ap- pear.

•The call channel number stop flash- ing.

ePush [16•9] again for 3 sec. (until a long beep changes to 2 short beeps) to enter call channel pro- gramming condition.

•Call channel number to be pro- grammed flashes.

rPush [Y]/[Z] to select the desired channel.

12