Icom IC-M32 Dualwatch/Tri-Watch, Description, Operation, DUALWATCH/TRI-WATCH Simulation

6 DUALWATCH/TRI-WATCH

■Description

Dualwatch monitors Channel 16 while you are receiving another channel; tri-watch monitors Channel 16 and the call channel while receiving another channel.

DUALWATCH/TRI-WATCH SIMULATION

Call channel

DualwatchTri-watch

•If a signal is received on Channel 16, dualwatch/tri-watch pauses on Channel 16 until the signal disappears.

•If a signal is received on the call channel during tri-watch, tri-watch becomes dualwatch until the signal disappears.

•To transmit on the selected channel during dualwatch/tri- watch, push and hold [PTT].

■Operation

qSelect the desired operating channel.

wPush [SCN•DUAL] for 1 sec. to start dualwatch or tri-watch (depending on SET mode setting).

•“DUAL” blinks during dualwatch; “TRI” blinks during tri-watch.

•A beep tone sounds when a signal is received on Channel 16.

•Tri-watch becomes dualwatch when receiving a signal on the call channel.

eTo cancel dualwatch/tri-watch, push [SCN•DUAL] again.

[Example]: Operating tri-watch on INT channel 07.

DUAL

Tri-watch starts.

Push

for 1 sec.

Signal is received on the call channel.

Signal received on Channel 16 takes priority.

Tri-watch resumes after the signal disappears.

16